Thursday, November 29, 2018

Gravity: Digital Peristaltic Pump

INTRODUCTION



Gravity: digital peristaltic pump is a new product developed by KDRobotKit. This is a new member of our water quality monitoring devices. It is an actuator for the liquid system.
KDRobotKit peristaltic pump integrates a PPM motor driver on the pump, this is a Gravity interface (PH2.0-3P) motor driver. The control signal is compatible with standard servo motor, you can use Arduino, Raspberry Pi, micro:bit and other kinds of microcontrollers to control its direction and flow speed. The tube in the pump head is made up of BPT material, which is anti-acid and long life.
Peristaltic pumps are a kind of positive displacement pump used for delivering small amounts of fluid. The fluid is contained within a flexible tube fitted inside a circular pump casing. When the rotor rotates continuously, the fluid in the tube will be squeezed and deliver to the other side. In this way, the liquid flow rate can be easily accuracy controlled.




(Excerpt from internet)

As a kind of metering pump, peristaltic pump can be conveniently used for quantitative delivery. It has a wide range of application scenarios, such as science experiment, hydroponics, drip irrigation, tropical fish farming, shrimp cylinder environment control, etc. A large number of titration experiments can be automated with this peristaltic pump, such as potentiometric titration, indicator-based colorimetric titration, pH-based titration, and so on. It is great helpful to improve your working efficiency
At the other hand, peristaltic pumps also have a wide range of applications in food, medical and other industries. Making an automatic coffee machine will be a really good idea!

Arduino Peristaltic Pump
Attention:Since the motor power consumption (about 5W) is a little large, it’s better to add an external power supply on your microcontroller, USB port can only provide 2.5W power supply.

SPECIFICATION



Driver Board


    • Input Voltage: 5V-6V

    • Maximum Continuous Operating Current: 1.8A

    • Peak Current: 2.5A

    • Quiescent Current: <1mA (No PPM Signal Input)

    • PPM Signal Resolution: 1us

    • Positive Pulse Width of the PPM Signal: 500us-2500us

    • Forward Pulse Width Range: 500us-1400us (500us: max forward speed)

    • Stop Pulse Width Range: 1400us-1600us

    • Inverted Pulse Width Range: 1600us-2500us (2500us: max inverted speed)

    • PPM Frequency: 50Hz (Servo Control Signal)

    • Connector: Gravity PH2.0-3P

    • Size: 27.4 x 28.7 mm/1.08 x 1.13 inches

    Peristaltic Pump


    • Motor: DC Motor

    • Rated Voltage: 6V

    • Rated Power: 5W

    • Tube Material: BPT

    • Tube Specifications: inner diameter 2.5mm, outer diameter 4.5mm

    • Pump Head Material: Engineering Plastics

    • Pulsation: Three Rollers, Small Pulsation

    • Flow: ≥45ml/min (almost 1ml/s)

    • Working Conditions: ambient temperature 0 ~ 40 ℃, relative humidity <80%

    FEATURES



    Peristaltic pump

    • Low noise,

    • Low cost,

    • Simple structure,

    • Easy to maintain,

    • Three rotors with moderate pulsation,

    • Non-toxic and pollution-free

    Driver board


    • Gravity 3Pin digital connector, plug and play

    • Servo PPM control signal, driving easily and compatible with Arduino, Raspberry Pi, micro: bit and other controllers.

    PACKING LIST



    • Gravity: digital peristaltic pump with PPM motor driverx1

    • Digital sensor cable x1

    • Silicone tube (1m) x1

    • 10mL plastic measuring cylinder x1

    DOCUMENTS



    Product wiki
    More Documents
    Code Resources

    COUNTRIES WE SHIP TO

    Sweden, Spain, Czech Republic, Madagascar, Saint Kitts and Nevis, Gabon, Guinea-Bissau, Libya, Cape Verde, Burkina Faso, Norway, Belgium, Reunion, Liberia, Romania, Russian Federation, Solomon Islands, Timor Leste, Malawi, China - Hong Kong / Macau, Montenegro, Sierra Leone, Greece, Germany, Namibia, Bhutan, Mali, Honduras, Antigua & Barbuda, Austria, Philippines, Rwanda, Anguilla, Kosovo, Congo, Democratic Republic of (DRC), Mauritania, Suriname, Belarus, Montserrat, Ivory Coast (Cote d'Ivoire), Congo, Zambia, Liechtenstein, Malaysia, Tunisia, Martinique, Tanzania, Papua New Guinea, Uruguay, Bangladesh, Guyana, Iran, Algeria, Haiti, Switzerland, Venezuela, Pacific Islands, Peru, Korea, Republic of (South Korea), Andorra, Swaziland, Angola, Eritrea, Dominican Republic, Guatemala, Oman, Cayman Islands, El Salvador, France, South Africa, Lithuania, Thailand, Hungary, Turks & Caicos Islands, Yemen, Gambia, Indonesia, Qatar, Portugal, Luxembourg, Georgia, Korea, Democratic Republic of (North Korea), Moldova, Republic of, Costa Rica, Bolivia, Equatorial Guinea, Bahamas, Saint Vincent and the Grenadines, Netherlands, Croatia, Jamaica, Mexico, Italy, Serbia, Brazil, Kazakhstan, Uzbekistan, Lebanon, Morocco, Myanmar/Burma, Armenia, Nigeria, Saudi Arabia, Brunei Darussalam, Chile, Belize, Bermuda, Cyprus, Argentina, Saint Lucia, Mongolia, Comoros, Poland, Mauritius, Monaco, Ghana, Lesotho, Mayotte, Ukraine, Australia, Fiji, Turkmenistan, Sao Tome and Principe, French Guiana, Kyrgyz Republic (Kyrgyzstan), Burundi, Guadeloupe, Cameroon, Nepal, Dominica, Niger, Bulgaria, Uganda, Denmark, Trinidad & Tobago, United Arab Emirates, Senegal, Grenada, Laos, Virgin Islands (US), Ethiopia, Canada, Virgin Islands (UK), Sri Lanka, Paraguay, Finland, New Zealand, Bahrain, Seychelles, Sudan, Mozambique, Maldives, Nicaragua, Azerbaijan, Slovak Republic (Slovakia), Barbados, Botswana, Macedonia, Republic of, Great Britain, Iraq, Djibouti, Jordan, Ecuador, Cuba, Samoa, Slovenia, Puerto Rico, Vietnam, Estonia, Chad, Singapore, India, Iceland, Latvia, Kuwait, Egypt, Albania, Syria, Kenya, Malta, Benin, Guinea, Israel and the Occupied Territories, Pakistan, Somalia, Afghanistan, China, United States of America (USA), Central African Republic, Tajikistan, South Sudan, Bosnia & Herzegovina, Colombia, Japan, Cambodia, Panama, Turkey, Togo, Zimbabwe


    https://kdrobotkit.com/product/gravity-digital-peristaltic-pump/

    Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)

    INTRODUCTION



    Micro:Mate is a tiny micro:bit I/O expansion board for learning electronics and building DIY projects.
    Micro:Mate expands 6 sets of 3-pin I/O interfaces, capable of connecting KDRobotKit Gravity series modules, servo motors, sensors and jumper wires. Additionally, Pin 8, 12, 16 support voltage switch between 3V-5V, allowing up to 5V 2A digital (PWM) output.
    Micro:Mate is in the same dimension of micro:bit. It connects to micro:bit through contact pins (with spring loaded), ensuring easy, compact and secure connection. The rubber bumpers and the 3.5mm audio jack on the back side keep the expansion installed stably on the board, meanwhile prevents reversed connection.

    Note:
    The mounting screws should be well tightened to ensure a secured connection.
    Micro:Mate only supports 3V (3.3V) analog input from Pin 0, 1, 2. The Micro USB
    Power port on Micro:Mate cannot be used for data transmission.
    Components with large power consumption should be connected to Pin 8, 12, 16, with 5V power supply.


    Project 1: OBLOQ-IoT Module +Micro:bit IoT Flower Watering


    Hardware list:  
    Gravity: UART OBLOQ – IOT Module (Microsoft Azure)
    Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
    Micro:bit - an Educational & Creative Tool for Kids
    9g Metal Gear Micro Servo (1.8Kg)
    One bottle and part of tube
    Gravity: Analog Capacitive Soil Moisture Sensor- Corrosion Resistant


    Project 2: Microbit Projects: Yes/No Bear

    There are 2 possible answers. Either yes or no. We randomly generate the outcome when a button is pressed. When the answer is yes, the display will show Y & the tilt servo will response. When no, the display will show N and pan servo will response.
    Part needed
    2 x 9G servo motor
    1 x microbit
    1 x micro:mate(breakout board)
    1 x Pan tilt kit
    1 x stuffed toy bear

    Project 3: Micro:bit car with KDRobotKit gamepad

    What you need?
    Arcylic car chassis with 3 wheels (kit)
    L9110 Dual Channel Motor Driver Module
    micro:bits x 2
    micro:bit mate
    micro:gamepad
    Double sided tape to stick the battery holder to the acrylic
    Glue gun to immobilize the back wheel
    Dupont cables

    Project 4:  LED writing board (micro:bit compatible)


    The LED writing board is created using a photo frame that is surrounded with LED strip lights. When button A is pressed, the led strip turns white and flash. When button B is pressed, a random color is generated. To off, press button A and B together.
    Hardware components: 


    1 x photo frame
    RGB individually addressable LED strip (neo pixels)
    1 x microbit
    1 x micro:mate(breakout board)    


    Microbit Project 5: Basketball score counter


    Part needed


    1 x IR sensor


    1 x micro:bit


    1 x micro:mate(breakout board)


    1 X Gravity: Digital Speaker Module


    Dupont cables



    Basketball hoop


    SPECIFICATION



  • Interface: 6 x Gravity 3Pin

  • Operating Voltage: 5V/3.3V

  • Input Power: <10W

  • Measuring Range: 0-3.3V (Analog), 0-5V (Digital):

  • Dimension:68.5 * 53.3mm/ 2.7 * 2.1 inches

  • Weight:22.8g

  • FEATURES



  • Color coded Gravity 3-Pin interface, compatible with hundreds of plug&play electronic modules

  • 3-way analog input; 6-way digital input/output (PWM); 3V/5V jumper switch; 3.5mm audio jack

  • External Micro USB power port, up to 5V 2A power output.

  • Well-designed component lay-out and silk-screen. Reversed connection protection.

  • PACKING LIST



  • Micro:Mate Gravity Expansion Board x1

  • Brass nut M4*5*4 x2

  • DOCUMENTS



    Product wiki
    More Documents

    COUNTRIES WE SHIP TO

    Mauritania, Guatemala, Estonia, Montenegro, Sierra Leone, Saint Kitts and Nevis, Qatar, France, Virgin Islands (UK), Slovak Republic (Slovakia), Oman, Latvia, Paraguay, South Sudan, Mauritius, Turkey, Indonesia, Malawi, Andorra, Ivory Coast (Cote d'Ivoire), Belgium, Luxembourg, Cuba, Romania, Sudan, South Africa, Turkmenistan, Congo, Montserrat, Mozambique, Monaco, Croatia, Madagascar, Timor Leste, Dominican Republic, Iceland, Bhutan, Reunion, Slovenia, Rwanda, Uruguay, Peru, Brunei Darussalam, Czech Republic, French Guiana, Cape Verde, Nigeria, Virgin Islands (US), Maldives, Georgia, Norway, Saint Vincent and the Grenadines, Malta, Syria, Jordan, Barbados, Austria, Russian Federation, Somalia, Botswana, Martinique, Jamaica, Hungary, Liberia, Lithuania, Kuwait, Great Britain, Congo, Democratic Republic of (DRC), Tunisia, Saudi Arabia, Costa Rica, Ghana, Guinea-Bissau, Laos, Djibouti, Philippines, Afghanistan, Suriname, Zambia, Gambia, Saint Lucia, Iraq, Swaziland, Panama, Egypt, Switzerland, Azerbaijan, Brazil, Finland, Israel and the Occupied Territories, Armenia, China - Hong Kong / Macau, Benin, Bahamas, Eritrea, Uzbekistan, Pakistan, Canada, Iran, Greece, Bangladesh, Myanmar/Burma, Zimbabwe, Ukraine, Cameroon, Moldova, Republic of, Cayman Islands, Macedonia, Republic of, Korea, Republic of (South Korea), Morocco, Antigua & Barbuda, Togo, Bahrain, Guadeloupe, Haiti, Colombia, Albania, Malaysia, Honduras, Chad, Venezuela, Lesotho, Mongolia, Burundi, Ecuador, United Arab Emirates, Sao Tome and Principe, Nicaragua, Mayotte, Korea, Democratic Republic of (North Korea), Yemen, Kyrgyz Republic (Kyrgyzstan), Niger, Trinidad & Tobago, Argentina, Netherlands, Nepal, Fiji, Mexico, Burkina Faso, Sri Lanka, Samoa, Guyana, Central African Republic, Mali, Belarus, Namibia, Grenada, Puerto Rico, Tajikistan, Pacific Islands, Angola, New Zealand, Ethiopia, Chile, Bolivia, Libya, United States of America (USA), El Salvador, Lebanon, India, Tanzania, Spain, Anguilla, Dominica, Seychelles, Algeria, Bermuda, Germany, Kosovo, Singapore, Bulgaria, China, Gabon, Senegal, Serbia, Uganda, Liechtenstein, Thailand, Belize, Cyprus, Equatorial Guinea, Denmark, Solomon Islands, Comoros, Papua New Guinea, Vietnam, Turks & Caicos Islands, Kenya, Australia, Japan, Sweden, Poland, Guinea, Italy, Portugal, Bosnia & Herzegovina, Cambodia, Kazakhstan


    https://kdrobotkit.com/product/micromate-a-mini-expansion-board-for-microbit-gravity-compatible/

    FireBeetle OSD Character Overlay Module

    INTRODUCTION



    OSD is the abbreviation of On-screen Display, this is a screen menu adjustment display technology to add different menu-style characters on the screen display.

    FireBeetle OSD Character Overlay Module is a new product presented by KDRobotKit. It adopts AT7456E OSD chip. This is a single-channel OSD module, equipped with functions like video drive, sync separator, video separate switch, etc. It comes with 512 bytes EEPROM user-defined storage space. After connected to video sources (AV Signals), the display covers 540x192 pixels which can show 16x30 characters on the screen. Users can also call font library to show characters and images.
    This FireBeetle OSD Character Overlay Module is compatible with FireBeetle series interfaces and can be directly plugged into FireBeetle mainboards.

    This module can be widely applied to device character display and time display of monitor device such as road cameras, home automation.

    SPECIFICATION



  • Operating Voltage: 3.3V~5V

  • Operating Current: 75mA

  • Character Display: 16x30

  • Character Pixel: 18x12

  • Resolution: 540x192

  • Color to Show: Single Color (White)

  • Signal Source: AV I/O

  • Communication Interface: SPI

  • Operating Temperature: -10℃~85℃

  • Dimension: 2.28in x 1.14in/58mm x 29mm

  • FEATURES



  • 512-byte EEPROM user-defined storage space

  • Support blink, inverse color and background control characters

  • Support setting lightness line-by-line.

  • Maximum 16x30 characters display

  • Support attenuation compensation of video drive output

  • Built-in sync generator and support external compound sync signal input

  • Compatible with NTSC and PAL

  • Built-in characters stock

  • PACKING LIST



  • FireBeetle OSD Character Overlay Module x1

  • AV to JST-2P Wires x2

  • 2.54 Black Female Header-18P x2

  • 2.54 Black Pin-18P x2

  • 2.54 Black Pin-4P x1

  • DOCUMENTS



    Product wiki
    More Documents

    COUNTRIES WE SHIP TO

    Lesotho, Namibia, Bolivia, Grenada, Argentina, Burundi, Ghana, Congo, Democratic Republic of (DRC), Sudan, Guatemala, Andorra, Bahamas, Sao Tome and Principe, Belarus, Kosovo, Equatorial Guinea, Swaziland, Costa Rica, Peru, Togo, Madagascar, Mongolia, France, Bermuda, Romania, Nigeria, Oman, Austria, Bosnia & Herzegovina, Pacific Islands, Jamaica, Saint Kitts and Nevis, Iran, Uruguay, Mali, Great Britain, French Guiana, Ivory Coast (Cote d'Ivoire), Denmark, Yemen, Samoa, Uganda, Antigua & Barbuda, Macedonia, Republic of, Fiji, Guadeloupe, Dominica, Turks & Caicos Islands, Lebanon, Canada, Qatar, Thailand, South Africa, Latvia, Armenia, Estonia, Slovenia, Botswana, Serbia, Myanmar/Burma, Montserrat, Netherlands, Azerbaijan, Barbados, Virgin Islands (US), Guyana, Egypt, Suriname, Solomon Islands, Czech Republic, Kazakhstan, Mauritania, Norway, Ukraine, Philippines, Hungary, Chile, South Sudan, Mauritius, Libya, Mozambique, Montenegro, Niger, Bahrain, Malaysia, Belgium, Nepal, Venezuela, Laos, Tajikistan, Timor Leste, Indonesia, Puerto Rico, Lithuania, Greece, Finland, El Salvador, Ethiopia, Maldives, Monaco, Germany, Cambodia, Djibouti, Mexico, Benin, Liberia, Martinique, Ecuador, Comoros, United States of America (USA), Guinea-Bissau, Singapore, Senegal, Gambia, Bhutan, Russian Federation, New Zealand, Switzerland, Korea, Democratic Republic of (North Korea), Zimbabwe, Mayotte, Seychelles, Trinidad & Tobago, Korea, Republic of (South Korea), Italy, China - Hong Kong / Macau, Israel and the Occupied Territories, Chad, Morocco, Algeria, Kyrgyz Republic (Kyrgyzstan), Bangladesh, Slovak Republic (Slovakia), Saudi Arabia, Spain, Honduras, Tunisia, Anguilla, Saint Vincent and the Grenadines, China, Iceland, Bulgaria, Vietnam, United Arab Emirates, Colombia, Malawi, Kenya, Cuba, Afghanistan, Zambia, Pakistan, Uzbekistan, Australia, Syria, Sierra Leone, Eritrea, Congo, Cape Verde, Virgin Islands (UK), Moldova, Republic of, Sri Lanka, Papua New Guinea, Tanzania, Brazil, Luxembourg, Turkmenistan, Brunei Darussalam, Saint Lucia, Gabon, Sweden, Haiti, Liechtenstein, Jordan, Georgia, Portugal, Croatia, Cayman Islands, Malta, Reunion, Kuwait, Somalia, Rwanda, Japan, Paraguay, Central African Republic, Panama, Nicaragua, Turkey, Albania, Dominican Republic, Cameroon, Angola, Cyprus, India, Poland, Iraq, Guinea, Belize, Burkina Faso


    https://kdrobotkit.com/product/firebeetle-osd-character-overlay-module/

    SIM7000C Arduino NB-IoT/LTE/GPRS/GPS Expansion Shield

    INTRODUCTION



    NB-IoT (Narrow Band-Internet of Things) technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN (Wide Area Network), which also called as LPWAN. NB-IoT operates in authorized frequency spectrum. It can be directly deployed to GSM, UMTS, LTE without any interference of current networks, while the bandwidth consumption is just about 180KHz.

    This SIM7000C Arduino NB-IoT/LTE/GPRS expansion shield is a wireless communication module produced by KDRobotKit and the design is based on SIMCom SIM7000C. This wireless communication module is designed for Arduino controllers, supporting multi-frequency LTE-FDD communication, dual-frequency GPRS/EDGE communication, NB-IoT communication. No matter prototype developments or small-batch productions, SIM7000C Arduino NB-IoT/LTE/GPRS expansion shield is the best solution to applications of low power consumption, low latency and meddle-throughput. Besides onboard GNSS (Global Navigation Satellite System), SIM7000C supports American GPS, Russian GLONASS, European Galileo, Japanese QZSS and Chinese BeiDou Navigation Satellite System. It can be widely applied to IoT applications such as long-distance control, moving tracking, long distance data uploading and shared bikes.


    SIM7000 Series Frequency Table





































    FunctionSIM7000CSIM7000ESIM7000A
    Quad-Band FDD-LTEB1/B3/B5/B8B3/B8/B20/B28B2/B4/B12/B13
    Output powerGSM900:2W
    DCS1800:1W
    GSM900:2W
    DCS1800:1W
    GSM900:2W
    DCS1800:1W
    Supply voltage range3.0V~4.3V3.0V~4.3V3.0V~4.3V
    GNSSGPS/GLONASS/BeiDou/Compass
    Galileo,QZSS
    GPS/GLONASS/BeiDou/Compass
    Galileo,QZSS
    GPS/GLONASS/BeiDou/Compass
    Galileo,QZSS
    LTE CAT-M1(eMTC)375kbps(up),300kbps(down)375kbps(up),300kbps(down)375kbps(up),300kbps(down)
    NB-IOT66kbps(up),34kbps(down)66kbps(up),34kbps(down)Not Support
    EDGE Class236.8kbps(up),236.8kbps(down)236.8kbps(up),236.8kbps(down)236.8kbps(up),236.8kbps(down)
    GPRS85.6kbps(up),85.6kbps(down)85.6kbps(up),85.6kbps(down)85.6kbps(up),85.6kbps(down)
    Power off7uA7uA7uA
    PSM9uA9uA9uA
    Idle11uA11uA11uA



    SIM7000C Arduino NB-IoT/LTE/GPRS/GPS Expansion Shield

    The SIM7000C Arduino NB-IoT/LTE/GPRS expansion shield supports both SIM card and NB-IoT card synchronously. You can plug in a common SIM card to achieve traditional GSM applications, such as make a phone call and send message. You can also plug in a NB-IoT card to realize NB-IoT data transmission. Besides, this expansion shield provides a BME280 environmental sensor. So it could be a prototype to develop NB-IoT projects, monitoring temperature, humidity and pressure.

    FEATURES



    Operating Voltage: 5V (NOTE: The module will consume great amount of current immediately when connected to the network. So the external power supply is needed at work.)
    Input Voltage: 7~12VDC (VIN range: 6~20V)
    Communication Module: SIM7000

  • Single-Band TDD-LTE B39

  • Quad-Band FDD-LTE B1/B3/B5/B8 (SIM7000C)

  • Quad-Band FDD-LTE B3/B8/B20/B28 (SIM7000E)

  • GPRS/EDGE 900/1800 MHz

  • Output power- GSM900: 2W- DCS1800: 1W

  • Control Via AT Commands

  • Operation temperature: -40℃ to +85℃

  • GNSS (GPS, GLONASS, BeiDou, Compass, Galileo, QZSS)

  • Firmware update via USB 2.0
  • Support SIM card and NB-IoT card (NOTE: Please ensure the SIM frequency range been used is included in the frequency range it supports).
    BME280 Environmental Sensor 
  • Temperature Measuring Range: -40℃~+85℃, resolution of 0.1℃, deviation of ±0.5℃

  • Humidity Measuring Range: 0~100%RH, resolution of 0.1%RH, deviation of ±2%RH

  • Pressure Measuring Range: 300~1100hPa

  • Humidity Sampling Time: 1s

  • Operating Temperature:-30℃~+85℃

  • Dimension: 2.1 x 2.7inch /53.4 x 68.6mm

  • DOCUMENTS



  • Product wiki

  • More Documents

  • COUNTRIES WE SHIP TO

    Chad, Barbados, Czech Republic, Swaziland, Congo, Qatar, Nigeria, Trinidad & Tobago, Comoros, Turkey, Iraq, Costa Rica, Benin, Brunei Darussalam, Belgium, Jamaica, Dominican Republic, Cambodia, Liberia, Guinea-Bissau, Djibouti, Italy, Tajikistan, Iran, Kazakhstan, Norway, France, Thailand, Greece, Nepal, Estonia, Guatemala, Samoa, Bahamas, Monaco, Grenada, Belize, Germany, Fiji, Bermuda, Hungary, Togo, Turkmenistan, Mongolia, Sierra Leone, Antigua & Barbuda, Azerbaijan, Korea, Democratic Republic of (North Korea), Spain, Maldives, Virgin Islands (US), India, Pakistan, Honduras, Cape Verde, Cyprus, Burkina Faso, Denmark, Paraguay, Zimbabwe, Tunisia, Pacific Islands, Nicaragua, Kosovo, Lesotho, Algeria, Anguilla, Virgin Islands (UK), Georgia, Kuwait, Namibia, Belarus, Equatorial Guinea, Brazil, Russian Federation, Mayotte, Bosnia & Herzegovina, Afghanistan, Reunion, Great Britain, Iceland, Latvia, Argentina, Cuba, Lebanon, Sudan, Bangladesh, Niger, Uganda, Sri Lanka, Canada, Mauritania, United Arab Emirates, Sao Tome and Principe, Malawi, South Sudan, Montenegro, Saint Kitts and Nevis, United States of America (USA), Libya, Martinique, Myanmar/Burma, Israel and the Occupied Territories, Panama, Cayman Islands, Albania, South Africa, Guadeloupe, Macedonia, Republic of, China - Hong Kong / Macau, Austria, Saint Vincent and the Grenadines, Central African Republic, Bolivia, Burundi, Uruguay, Mexico, Ivory Coast (Cote d'Ivoire), French Guiana, Haiti, Serbia, Japan, Oman, Puerto Rico, Cameroon, Solomon Islands, Sweden, Kenya, Croatia, Laos, Switzerland, Armenia, Korea, Republic of (South Korea), Bhutan, Saudi Arabia, Slovenia, Mauritius, Botswana, Australia, Colombia, Papua New Guinea, Poland, Seychelles, Timor Leste, Guyana, Lithuania, Portugal, Congo, Democratic Republic of (DRC), Venezuela, Chile, Gabon, Yemen, Montserrat, Turks & Caicos Islands, China, Indonesia, Luxembourg, Malta, Vietnam, Finland, Tanzania, Dominica, Guinea, Ukraine, Ecuador, Saint Lucia, Malaysia, Rwanda, Jordan, Romania, Philippines, Ghana, Somalia, Netherlands, Peru, New Zealand, Eritrea, Bulgaria, Andorra, Gambia, Bahrain, Ethiopia, Zambia, El Salvador, Madagascar, Mali, Liechtenstein, Syria, Senegal, Uzbekistan, Moldova, Republic of, Egypt, Morocco, Mozambique, Slovak Republic (Slovakia), Kyrgyz Republic (Kyrgyzstan), Singapore, Angola, Suriname


    https://kdrobotkit.com/product/sim7000c-arduino-nb-iot-lte-gprs-gps-expansion-shield/

    TF Mini LiDAR(ToF) Laser Range Sensor

    INTRODUCTION



    The TF Mini LiDAR is an unidirectional laser range finder based upon time-of-flight (ToF) technology. It consists of special optical and electronic devices, which integrates adaptive algorithm for indoor and outdoor application environment. It has tiny body and high performance in distance measurement.

    The laser sensor can be used as a distance-measuring tool to detect the distance from it to obstacles. It can also be used as an eye of a robot; it provides distance information for robotic safe avoidance and route selection. It supports for system automation in a variety of machine control scenarios. Because of its small size, light weight and low power consumption, it is also suitable for altitude hold quad-copters and terrain following.


    Figure 1: TF Mini Optical Stimulation Light Path


    TF Mini's maximum detection distance is 12 meters. TF Mini also supports 100Hz sampling resolution, within 6 meters, its accuracy is within 4cm, 6~12 meters, accuracy within 6 cm. FOV of 2.3 degree. Its anti-interference is strong, and can work in outdoor light; the overall weight is 4.7g.

    Measurement range schematic diagram


    TF Mini LiDAR adopts UART (TTL) communication interface, can supplied by standard 5V, and its average power consumption is 0.6w. It can be compatible with a variety of Arduino controllers. With the KDRobotKit Gravity IO Expansion Shield, Arduino can be plugged in directly without additional wiring.

    It can be easily integrated into the system when used with the Arduino library developed by KDRobotKit.

    Arduino TF mini Connection Diagram

    distance meter and obstacle detector with a mini td LiDAR (ToF) Laser and arduino



    NOTE:
  • The product may be invalid when probing objects with high reflectivity, such as mirrors and smooth tiles.

  • When there are transparent objects, such as glass and water, between the product and the tested object, it may become invalid.

  • Do not touch the circuit board with your bare hands. If necessary, please wear an electrostatic wristband or antistatic gloves.
  • SPECIFICATION



  • Voltage Range: 4.5V-6V

  • Communication Interface: UART (TTL)

  • Working Range: 0.3m-12m (indoor)

  • The Maximum Range of Reflectivity 10%:5m

  • Average Power: 0.6W

  • Acceptance Angle: 2.3°

  • Minimum Resolution: 5mm

  • Refresh Frequency: 100Hz

  • Ranging Accuracy: 1% (<6m), 2% (6 ~ 12m)

  • Ranging Unit: mm

  • Band: 850nm

  • Size: 1.65in x0.59in x0.63in / 42mm x15mm x16mm

  • Operating Temperature: 0°C ~ 60°C

  • Storage Temperature: -20°C~75°C

  • Anti-light Environment: 70Klux

  • Weight: 4.7g

  • FEATURES



  • Unidirectional laser range finder

  • Maximum Detection Range: 12m

  • Perform excellent in distance measurement, high precision.

  • Support 100Hz sampling resolution, responsive.

  • Small size and low power consumption.

  • PACKING LIST



  • TF Mini LiDAR(12m) x1

  • TF Mini LiDAR(12m) A wire x1

  • TF Mini LiDAR(12m) B wire x1

  • DOCUMENTS



    Product wiki
    More Documents

    COUNTRIES WE SHIP TO

    Costa Rica, Cambodia, Philippines, Uruguay, Pacific Islands, Brazil, Cape Verde, South Africa, Saint Vincent and the Grenadines, Italy, Belgium, Iceland, Mayotte, Sweden, Argentina, Ukraine, Sudan, Albania, Mexico, Virgin Islands (US), Honduras, Saint Lucia, Virgin Islands (UK), Netherlands, Cameroon, Syria, Montserrat, Switzerland, Congo, Democratic Republic of (DRC), Uganda, Pakistan, Niger, Bahamas, Fiji, Mali, Mauritius, Qatar, Burkina Faso, Antigua & Barbuda, Bosnia & Herzegovina, Tajikistan, Timor Leste, Tanzania, Lebanon, Malawi, Norway, Lesotho, Kenya, Israel and the Occupied Territories, Gabon, Thailand, Kosovo, Finland, Liechtenstein, Malta, Burundi, India, Paraguay, Botswana, Benin, Laos, Sierra Leone, Turks & Caicos Islands, Japan, Russian Federation, Great Britain, Yemen, Turkmenistan, Central African Republic, Iran, Sri Lanka, Mongolia, Chad, Ghana, Ecuador, Australia, United Arab Emirates, Germany, Moldova, Republic of, Vietnam, Papua New Guinea, Lithuania, Kyrgyz Republic (Kyrgyzstan), Nicaragua, Barbados, Azerbaijan, Martinique, Haiti, Peru, Estonia, Egypt, Sao Tome and Principe, Djibouti, Montenegro, Samoa, Korea, Democratic Republic of (North Korea), Ethiopia, Armenia, Guatemala, Ivory Coast (Cote d'Ivoire), Guyana, Iraq, France, Solomon Islands, Congo, Algeria, Nigeria, Spain, Liberia, Puerto Rico, Bermuda, Croatia, Slovenia, French Guiana, Belize, Suriname, Chile, Bhutan, Portugal, Grenada, Andorra, Saudi Arabia, New Zealand, Anguilla, Bolivia, Belarus, Maldives, Singapore, Guinea-Bissau, Cyprus, Serbia, Macedonia, Republic of, Namibia, Hungary, Dominican Republic, Brunei Darussalam, Cayman Islands, Latvia, Uzbekistan, Cuba, Afghanistan, Equatorial Guinea, Colombia, Romania, Seychelles, Tunisia, Bulgaria, Kazakhstan, Madagascar, Dominica, Luxembourg, Trinidad & Tobago, Saint Kitts and Nevis, Jamaica, China - Hong Kong / Macau, Guinea, Oman, Mozambique, United States of America (USA), Swaziland, Nepal, Indonesia, Mauritania, Guadeloupe, Myanmar/Burma, Zimbabwe, Denmark, Venezuela, Rwanda, Jordan, Monaco, Reunion, Georgia, Senegal, Czech Republic, Turkey, Zambia, Libya, Canada, Slovak Republic (Slovakia), El Salvador, Kuwait, Poland, Comoros, Korea, Republic of (South Korea), South Sudan, Bahrain, Morocco, Malaysia, Austria, Bangladesh, China, Togo, Greece, Panama, Somalia, Angola, Eritrea, Gambia


    https://kdrobotkit.com/product/tf-mini-lidartof-laser-range-sensor/

    Raspberry Pi 3 Model B+

    INTRODUCTION



    The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.

    We will hold Raspberry Pi Day Sale on 8th-10th of each month, during this period you can get an exclusive offer on this board in the form of Raspberry Pi 3 Model B+ Starter Kit.

    The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduce on wireless LAN compliance testing, cost and time resources. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
    Note: KDRobotKit distributes Element14 version.





    In this video, we're flashing RASPBIAN to an SD Card for Raspberry Pi Model 3 B+ using Etcher.
    You can easily run any of the Pi products following these 4 steps.





    Raspberry PI Computer | Tutorial | Raspberry PI 3 Model B+





    Make Mini PC using Raspberry Pi 3 and 7'' HDMI Display





    Make Google Chromecast using Raspberry Pi 3 B+ || Complete Guide





    Make *Pirate Box* using Raspberry Pi 3 Model B+ || PNPtutorials





    How to Install and Set Up RetroPie 4.4 on Raspberry pi 3 B+ or Raspberry Pi Zero


    Raspberry Pi 3 Model B+ Commonly Used Accessories (shown in the video):
  • 3.5" TFT Touchscreen for Raspberry Pi

  • 10.1" Diagonal - 1280x800 IPS HDMI/VGA/AV Display

  • Wireless Keyboard with Touchpad for Raspberry Pi and LattePanda

  • USB Power Supply Wall Adapter 5V@2.5A (EU Standard)

  • High Speed HDMI Cable (0.75M, Gold Plated)

  • 7'' HDMI Display with Capacitive Touchscreen


  • Raspberry Pi 3 Model B+ Tutorials:



  • Raspberry Pi 3 Raspbian: Python Hello World with IDLE

  • Raspberry Pi 3 Raspbian: Running Python from the command line

  • Raspberry Pi 3 Raspbian: Running Python scripts on IDLE

  • Raspberry Pi 3 Raspbian: Running a Flask server

  • Raspberry Pi 3: Getting the local IP address

  • Raspberry Pi 3 Raspbian: Exposing a Flask server to the local network

  • SPECIFICATION



  • Processor: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz

  • Memory: 1GB LPDDR2 SDRAM

  • Power Supply: 5V/2.5A DC power input (microUSB)

  • Wireless: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE

  • Ethernet: Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)

  • GPIOs: Extended 40-pin GPIO header

  • Video Output: Full-size HDMI

  • Audio Output: 4-pole stereo output and composite video port

  • USB Port: 4 USB 2.0 ports

  • CSI camera port for connecting a Raspberry Pi camera

  • DSI display port for connecting a Raspberry Pi touchscreen display

  • Micro SD port for loading your operating system and storing data

  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)

  • Operating Temperature: 0~50℃

  • Dimension: 120mm x 75mm x 34mm

  • Weight: 75g

  • FEATURES



  • A 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU

  • Dual-band 802.11ac wireless LAN and Bluetooth 4.2

  • Faster Ethernet (Gigabit Ethernet over USB 2.0)

  • Power-over-Ethernet support (with separate PoE HAT)

  • Improved PXE network and USB mass-storage booting

  • Improved thermal management

  • PACKING LIST



  • Raspberry Pi 3 Model B+ x1

  • DOCUMENTS



    Raspberry Pi Getting Started


    COUNTRIES WE SHIP TO

    Trinidad & Tobago, Denmark, Virgin Islands (US), Malawi, South Africa, Fiji, China - Hong Kong / Macau, Saint Kitts and Nevis, Uganda, Vietnam, Peru, Somalia, Azerbaijan, Suriname, Latvia, Chile, Mauritania, Brunei Darussalam, Ukraine, Antigua & Barbuda, Germany, Czech Republic, Iceland, Samoa, Pacific Islands, Belize, Ecuador, Montserrat, Uruguay, Congo, Democratic Republic of (DRC), Afghanistan, Paraguay, Madagascar, Turkey, India, South Sudan, Guadeloupe, Mali, Indonesia, Seychelles, Morocco, Philippines, Armenia, Canada, Guyana, Thailand, France, Cambodia, Mozambique, El Salvador, Great Britain, Andorra, Albania, Qatar, Austria, Tunisia, Mexico, Costa Rica, United Arab Emirates, Solomon Islands, Nepal, Reunion, Bangladesh, Sweden, Ghana, Slovak Republic (Slovakia), Norway, Cyprus, Tanzania, Liberia, Algeria, Hungary, Timor Leste, Guinea, Mayotte, Malta, Bulgaria, Bahamas, Croatia, Honduras, Venezuela, United States of America (USA), Kazakhstan, Australia, Brazil, Equatorial Guinea, Central African Republic, Yemen, Turkmenistan, Colombia, Iran, Macedonia, Republic of, Belgium, Senegal, Martinique, Oman, Japan, Chad, Cameroon, Tajikistan, Laos, Sudan, Papua New Guinea, Bhutan, Argentina, Mongolia, Malaysia, Ivory Coast (Cote d'Ivoire), Syria, Turks & Caicos Islands, Korea, Democratic Republic of (North Korea), Panama, Saint Lucia, Guinea-Bissau, Virgin Islands (UK), Angola, Iraq, Lesotho, Spain, Singapore, Slovenia, Eritrea, Maldives, China, Bosnia & Herzegovina, Switzerland, Lithuania, Saint Vincent and the Grenadines, Guatemala, Nigeria, Niger, Netherlands, Luxembourg, Puerto Rico, Monaco, Djibouti, Jordan, Comoros, Israel and the Occupied Territories, Myanmar/Burma, New Zealand, Jamaica, Dominican Republic, Korea, Republic of (South Korea), Gabon, Cuba, Mauritius, Dominica, Namibia, Moldova, Republic of, Kosovo, Montenegro, Portugal, Italy, Romania, Georgia, Anguilla, Kuwait, Zimbabwe, Saudi Arabia, Cape Verde, Congo, Belarus, Sri Lanka, Sao Tome and Principe, Libya, Togo, Nicaragua, Pakistan, Ethiopia, Finland, French Guiana, Gambia, Rwanda, Kenya, Swaziland, Cayman Islands, Bahrain, Sierra Leone, Estonia, Burkina Faso, Botswana, Liechtenstein, Russian Federation, Barbados, Kyrgyz Republic (Kyrgyzstan), Haiti, Uzbekistan, Poland, Greece, Bolivia, Grenada, Bermuda, Egypt, Zambia, Lebanon, Benin, Burundi, Serbia


    https://kdrobotkit.com/product/raspberry-pi-3-model-b/

    2x1.2A DC Motor Driver (TB6612FNG)

    INTRODUCTION



    This KDRobotKit micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits KDRobotKit L298N motor control logic, which only need four pins to drive 2 motors. Compared with the IC Breakout, it saves two precious GPIO resource, especially in Arduino UNO board.
    TB612FNG is a dual-channel full-bridge drive chip. The maximum continuous drive current of single channel can reach 1.2A, peak value 2A/3.2A (continuous pulse / single pulse) , which can drive some micro DC motors. The control logic is similar to L298n, and the code can be directly compatible with the DFROBOT L298N motor driver. Standard XH2.54 pin can be inserted directly into the breadboard. It is a good choice for DIY project or product developments.

    SPECIFICATION



  • VCC Operating Voltage: 2.7V~5.5V

  • VM Input Power: 2.5V~12V

  • Driver Channel: 2 channel

  • Output Current: 1.2A (single-channel continuous drive current)

  • Start / Peak Current: 2A (continuous pulse) / 3.2A (single pulse)

  • Dimension: 0.79 x 0.77(in) / 20 x 19.50(mm)

  • PACKING LIST



  • 2x1.2A DC Motor Driver (TB6612FNG) x1

  • XH2.54-6Pin x2

  • DOCUMENTS



    Product wiki
    More Documents

    COUNTRIES WE SHIP TO

    Saudi Arabia, Timor Leste, Tunisia, Ghana, Netherlands, Saint Lucia, Monaco, Comoros, Anguilla, Virgin Islands (US), Zambia, Samoa, Solomon Islands, Romania, Kuwait, Tajikistan, Kosovo, Djibouti, Benin, Togo, Libya, Burundi, Kenya, Reunion, Norway, Chad, Congo, Egypt, Latvia, Brunei Darussalam, Singapore, Jordan, Bulgaria, Eritrea, Estonia, Guinea, South Africa, Nepal, Haiti, Uruguay, Japan, Bahrain, Seychelles, Denmark, Gabon, Montenegro, Ecuador, Turkey, Ethiopia, Madagascar, Swaziland, Cayman Islands, Saint Vincent and the Grenadines, Grenada, Saint Kitts and Nevis, United Arab Emirates, Bahamas, Zimbabwe, Bosnia & Herzegovina, France, Vietnam, Kazakhstan, Great Britain, Mauritius, Trinidad & Tobago, Myanmar/Burma, Guatemala, Guinea-Bissau, Peru, Luxembourg, Greece, Georgia, Belize, Maldives, Turkmenistan, Finland, Antigua & Barbuda, Afghanistan, Chile, Iceland, Cyprus, Kyrgyz Republic (Kyrgyzstan), Cambodia, Lithuania, Oman, Poland, Panama, Lebanon, Turks & Caicos Islands, Switzerland, Bolivia, Canada, French Guiana, Uzbekistan, Mali, Israel and the Occupied Territories, Morocco, Burkina Faso, Armenia, Hungary, Croatia, El Salvador, Papua New Guinea, Barbados, Somalia, Liberia, Czech Republic, Sudan, Iran, China - Hong Kong / Macau, Malawi, Mozambique, Russian Federation, Pakistan, Puerto Rico, Sweden, Guadeloupe, Dominica, Sri Lanka, Belarus, Rwanda, Botswana, Fiji, Syria, Bhutan, Belgium, Niger, Iraq, Brazil, Paraguay, Bangladesh, Cape Verde, Honduras, Colombia, Algeria, Cameroon, Nicaragua, Indonesia, Spain, Albania, Cuba, Slovak Republic (Slovakia), Serbia, Senegal, Venezuela, New Zealand, Virgin Islands (UK), Montserrat, Yemen, Ukraine, Slovenia, Philippines, Guyana, Congo, Democratic Republic of (DRC), Laos, Portugal, Sierra Leone, Azerbaijan, Equatorial Guinea, Gambia, Australia, Italy, Qatar, Jamaica, Dominican Republic, Malaysia, United States of America (USA), Martinique, Mongolia, Austria, Germany, South Sudan, Andorra, Korea, Democratic Republic of (North Korea), China, Lesotho, Tanzania, Malta, Mayotte, Uganda, Liechtenstein, Nigeria, Suriname, Mexico, Angola, Korea, Republic of (South Korea), Costa Rica, Bermuda, India, Namibia, Pacific Islands, Ivory Coast (Cote d'Ivoire), Mauritania, Macedonia, Republic of, Thailand, Argentina, Central African Republic, Moldova, Republic of, Sao Tome and Principe


    https://kdrobotkit.com/product/2x1-2a-dc-motor-driver-tb6612fng/