1.75mm 1Kg 3D Printer PLA Filament (Sky Blue)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Sky Blue)

COUNTRIES WE SHIP TO

Poland, Mexico, Bosnia & Herzegovina, Ghana, Tunisia, Botswana, Timor Leste, United Arab Emirates, Singapore, Saint Lucia, Slovenia, Pakistan, China, Lithuania, Jamaica, Estonia, Guyana, Iceland, Somalia, Peru, Samoa, Seychelles, Macedonia, Republic of, Mongolia, Brazil, Slovak Republic (Slovakia), Equatorial Guinea, Myanmar/Burma, Anguilla, Papua New Guinea, Brunei Darussalam, Israel and the Occupied Territories, Reunion, Togo, Grenada, Swaziland, Ecuador, United States of America (USA), Afghanistan, Angola, Bahrain, Cuba, Pacific Islands, Luxembourg, Djibouti, Senegal, Sri Lanka, Romania, Libya, Haiti, Finland, South Sudan, Eritrea, Belarus, Guadeloupe, Namibia, Kyrgyz Republic (Kyrgyzstan), French Guiana, Canada, Saint Vincent and the Grenadines, Maldives, Mauritius, Congo, Congo, Democratic Republic of (DRC), Mali, Bahamas, Bhutan, Bolivia, Algeria, Nigeria, Norway, Vietnam, Costa Rica, Cameroon, Philippines, Azerbaijan, Burkina Faso, Denmark, Chile, Sudan, Chad, Colombia, Suriname, Portugal, Kazakhstan, Solomon Islands, Cyprus, Iraq, Guatemala, Malta, Malawi, Virgin Islands (UK), Egypt, Mayotte, Liberia, Zimbabwe, Albania, Honduras, Montserrat, Belgium, Ukraine, Korea, Democratic Republic of (North Korea), Serbia, Indonesia, Mauritania, Fiji, Jordan, Liechtenstein, Trinidad & Tobago, Uzbekistan, Japan, Gambia, Guinea, Czech Republic, Sweden, Korea, Republic of (South Korea), Turkey, Bangladesh, Virgin Islands (US), Bulgaria, Moldova, Republic of, Zambia, New Zealand, Tanzania, Bermuda, Austria, Russian Federation, Antigua & Barbuda, Niger, Oman, Laos, Yemen, Burundi, Morocco, Kuwait, Benin, Croatia, Greece, Qatar, Venezuela, Switzerland, Sao Tome and Principe, Belize, Tajikistan, Mozambique, Netherlands, Uganda, South Africa, Hungary, Montenegro, Saint Kitts and Nevis, India, Kosovo, Ivory Coast (Cote d'Ivoire), Comoros, Puerto Rico, France, Madagascar, Cayman Islands, Paraguay, Monaco, Cape Verde, Iran, Rwanda, Latvia, China - Hong Kong / Macau, Saudi Arabia, Cambodia, Thailand, Lebanon, Argentina, Central African Republic, Australia, Armenia, Italy, Guinea-Bissau, Uruguay, Germany, Ethiopia, Turkmenistan, Martinique, Nicaragua, Dominican Republic, Sierra Leone, Syria, Dominica, El Salvador, Malaysia, Spain, Panama, Kenya, Turks & Caicos Islands, Lesotho, Gabon, Nepal, Andorra, Barbados, Georgia, Great Britain

https://kdrobotkit.com/product/1-75mm-1kg-3d-printer-pla-filament-sky-blue/

Gravity: UART OBLOQ – IoT Module (Microsoft Azure)

INTRODUCTION

If you still don’t know how to play Internet of Things (IoT), the KDRobotKit OBLOQ module will be ideal for connecting you to the IoT world.
The core of IoT is user experience. It integrates embedded system technology, mobile technology and network technology all together, making up a smart system. It unifies hardware, software and network services, makes them become a whole. You can check these Obloq Tutorials for a initail start.
Gravity: UART OBLOQ module is a WiFi to Serial device. It faces to non-professional developers, supports standard MQTT protocol IoT service such as Microsoft Azure IoT. By OBLOQ module, you can quickly build the IoT applications without having a complex background knowledge of IoT. In this way, makers can really focus on the purpose of creating interesting things on the IoT.
OBLOQ is designed based on ESP8266 WiFi chip, it has compact size, low price, simple interface, plug and play feature, and it works stably under the 3.3V ~ 5V control system.
Below is the connection diagram of Arduino UNO and OBLOQ.

Microsoft Azure IoT

Microsoft Azure IoT

Microsoft Azure is a publicly-owned cloud platform, it enables enterprises to run their own applications across the Internet. With Microsoft Azure, organizations can rapidly develop, deploy, and manage applications across multiple data centers.

Project 1: OBLOQ-IoT Module +Micro:bit IoT Flower Watering

Hardware list:  
Gravity: UART OBLOQ – IoT Module (Microsoft Azure)
Micro:Mate - A Mini Expansion Board for micro:bit (Gravity Compatible)
Micro:bit - an Educational & Creative Tool for Kids
9g Metal Gear Micro Servo (1.8Kg)
One bottle and part of tube
Gravity: Analog Capacitive Soil Moisture Sensor- Corrosion Resistant

Project 2: Environmental Monitoring System Based on OBLOQ-IoT Module
This product is mainly applied in electronic laboratory to monitor and control indicators such as temperature, humidity, light and dust, and timely upload them to the cloud data space to achieve remote monitoring and control of dehumidifier, air purifier, exhaust fan and dimmable light, etc. in the laboratory.    

Hardware List: 

DFRduino UNO R3 - Arduino Compatible
Gravity: UART OBLOQ – IoT Module (Microsoft Azure) DHT22 Temperature and Humidity Sensor
Sharp GP2Y1010AU0F Compact optical Dust Sensor
Gravity: i2C BMP280 Barometer Sensor
Gravity: Analog Ambient Light Sensor For Arduino
LCD12864 Shield for Arduino
Quadruple relay module

SPECIFICATION

Operating Voltage: 3.3-5V

Supply Voltage: 3.3 ~ 5.5V

Baud rate: 9600 bps

Wireless Frequency: 2.4GHz

Interface Type: Gravity UART 4PIN

Wireless mode: IEEE802.11b / g / n

SRAM: 160KB

External Flash: 4MB

Supports low power consumption: <240mA

Dimension: 35mm * 32mm / 1.38inch * 1.26inch

Weight: 16g

FEATURES

Built-in low-power 32-bit CPU: Can be used as an application processor

Built-in protocol: TCP / IP stack

Encryption type: WPA WPA2 / WPA2-PSK

Supports connections to standard MQTT protocols and TTL serial ports to wireless applications

PACKING LIST

Gravity: UART OBLOQ – IoT Module (Microsoft Azure) x1

Gravity 4Pin IIC/I2C/UART Sensor Cable x1

DOCUMENTS

Product wiki
More Documents
Microsoft Azure IoT

COUNTRIES WE SHIP TO

Brunei Darussalam, Comoros, French Guiana, Israel and the Occupied Territories, South Sudan, Portugal, Thailand, Oman, Costa Rica, Ecuador, Venezuela, Uzbekistan, Trinidad & Tobago, Niger, Greece, Peru, United States of America (USA), Panama, Sao Tome and Principe, Botswana, Mali, Lebanon, Lithuania, Mauritius, Anguilla, Togo, Romania, United Arab Emirates, Norway, Eritrea, Vietnam, Montenegro, Madagascar, Dominican Republic, Kenya, Gabon, Swaziland, Virgin Islands (US), Turkey, Ghana, Estonia, New Zealand, Cuba, Chad, Liechtenstein, Libya, Japan, Kosovo, Russian Federation, Jordan, China, Reunion, Colombia, Tunisia, Myanmar/Burma, Samoa, Bolivia, Pakistan, Macedonia, Republic of, Solomon Islands, France, Mayotte, Armenia, Netherlands, Paraguay, Mauritania, Guyana, Afghanistan, Congo, Democratic Republic of (DRC), Gambia, Guatemala, Yemen, Virgin Islands (UK), Belgium, Cape Verde, Azerbaijan, Andorra, Malta, Saint Vincent and the Grenadines, Hungary, Zimbabwe, Martinique, Benin, Nigeria, Pacific Islands, Nicaragua, Bahamas, Senegal, Liberia, Korea, Democratic Republic of (North Korea), Germany, Burkina Faso, Sweden, Angola, Indonesia, Spain, Egypt, Chile, Tajikistan, Rwanda, Tanzania, Kyrgyz Republic (Kyrgyzstan), Uganda, Serbia, Sudan, Czech Republic, Morocco, Qatar, Turks & Caicos Islands, Monaco, Papua New Guinea, Uruguay, Sri Lanka, Cyprus, Guinea, Great Britain, Brazil, Mongolia, Somalia, Denmark, Italy, Mozambique, El Salvador, Antigua & Barbuda, Bangladesh, South Africa, Burundi, Korea, Republic of (South Korea), Poland, Saint Lucia, Cameroon, Slovenia, Kazakhstan, Bosnia & Herzegovina, Seychelles, Moldova, Republic of, Mexico, Kuwait, Algeria, Bulgaria, Honduras, Djibouti, Zambia, Cambodia, Maldives, Bermuda, Philippines, Guinea-Bissau, Bahrain, Turkmenistan, Grenada, Ethiopia, China - Hong Kong / Macau, Belarus, Congo, Timor Leste, Latvia, Switzerland, Australia, Montserrat, Argentina, Belize, Austria, Equatorial Guinea, Haiti, Saudi Arabia, Iceland, Cayman Islands, Iraq, Ivory Coast (Cote d'Ivoire), Laos, Namibia, Albania, Sierra Leone, Ukraine, Fiji, Luxembourg, Central African Republic, Iran, Jamaica, Georgia, Dominica, Slovak Republic (Slovakia), Finland, Syria, Malawi, Barbados, Puerto Rico, Malaysia, India, Singapore, Canada, Bhutan, Croatia, Lesotho, Guadeloupe, Suriname, Saint Kitts and Nevis, Nepal

https://kdrobotkit.com/product/gravity-uart-obloq-iot-module-microsoft-azure/

Gravity: Analog Water Pressure Sensor

INTRODUCTION

This is a water pressure sensor adopts KDRobotKit Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers. Coordinate with a KDRobotKit Gravity IO Expansion Shield, the water pressure sensor can be plugged into an Arduino board, wiring-free. Put it with Solenoid Valve, Water Turbine Generator and other sensors, you can build a smart water control system.

Briefly speaking, this water pressure sensor is a stethoscope to a water pipe. It will help you to diagnose whether there is water, how strong the water pressure is. It can be widely applied to smart home control systems (SCS), Internet of Things (IoT) and device detections.

SPECIFICATION

Medium: liquid/gas without corrosion

Wiring: Gravity-3Pin (Signal-VCC-GND)

Pressure Measurement Range: 0~1.6 Mpa

Input Voltage: +5 VDC

Output Voltage: 0.5~4.5 V

Measurement Accuracy: 0.5%~1%FS (0.5%, 0~55°C)

Threadably: G1/4

Adapter: G1/2 to G1/4

Waterproof level: IP68

Operating Temperature: -20~85°C

Response Time: <2.0 ms

Quiescent Current: 2.8 mA

Normal Operating Pressure: ≤2.0 Mpa

Damaged Pressure: ≥3.0Mpa

Service Life: 10’000’000 times

FEATURES

Support water pressure detection of living environmental water systems, such as houses, gardens and farms.

Support water pressure detection of outdoor environment, such as rivers, lakes and sea.

Support water pressure detection of tanks;

Support liquid level detection in special situation detection in specified liquid;

PACKING LIST

Gravity: Analog Water Pressure Sensor x1

G1/2 to G1/4 Connector (mounted) x1

DOCUMENTS

Product wiki

COUNTRIES WE SHIP TO

Kazakhstan, Liberia, Hungary, Burundi, Montserrat, Suriname, Haiti, Pacific Islands, Romania, Korea, Republic of (South Korea), Kuwait, Thailand, El Salvador, Maldives, Togo, Papua New Guinea, Bangladesh, Comoros, Macedonia, Republic of, Angola, Kyrgyz Republic (Kyrgyzstan), China - Hong Kong / Macau, Sierra Leone, Samoa, Belgium, Turkey, Zambia, Yemen, Nicaragua, Libya, Myanmar/Burma, Barbados, Croatia, Bermuda, Ethiopia, Honduras, Trinidad & Tobago, Uganda, Venezuela, Saudi Arabia, Dominica, Namibia, Iraq, Guyana, Burkina Faso, Mozambique, Great Britain, Somalia, Congo, Netherlands, South Africa, China, Chile, Norway, Saint Kitts and Nevis, Pakistan, Grenada, Cuba, Morocco, Afghanistan, South Sudan, Mauritania, Botswana, Denmark, Fiji, Ecuador, Reunion, Mongolia, Equatorial Guinea, Canada, Guadeloupe, Algeria, Saint Vincent and the Grenadines, Israel and the Occupied Territories, Slovenia, Mali, Swaziland, Albania, Japan, Turkmenistan, Nigeria, Colombia, Zimbabwe, Chad, Malta, Mauritius, Uruguay, Eritrea, Iran, Martinique, Benin, Malaysia, Panama, Malawi, Oman, Cape Verde, Bolivia, Uzbekistan, Syria, Guinea, Korea, Democratic Republic of (North Korea), Anguilla, Tanzania, Virgin Islands (US), France, Russian Federation, Montenegro, Madagascar, Monaco, Senegal, Moldova, Republic of, Bhutan, Solomon Islands, Austria, Latvia, Greece, Sao Tome and Principe, Slovak Republic (Slovakia), Armenia, Singapore, Australia, Ukraine, Peru, Ghana, Sudan, Spain, Egypt, Tunisia, Paraguay, Germany, Tajikistan, Jordan, Mayotte, French Guiana, Costa Rica, Serbia, Czech Republic, Nepal, Guatemala, Georgia, Bulgaria, Switzerland, Virgin Islands (UK), Cayman Islands, Argentina, Cameroon, Philippines, Guinea-Bissau, Luxembourg, Bosnia & Herzegovina, Dominican Republic, Gambia, Puerto Rico, Timor Leste, Gabon, Liechtenstein, Estonia, Indonesia, Jamaica, Kenya, Andorra, Bahamas, Italy, Qatar, United States of America (USA), United Arab Emirates, Finland, Bahrain, Seychelles, Brunei Darussalam, Brazil, Lebanon, Azerbaijan, Cambodia, Niger, Belize, New Zealand, Lithuania, Portugal, Rwanda, Belarus, Antigua & Barbuda, Djibouti, Saint Lucia, Vietnam, Laos, Turks & Caicos Islands, Sri Lanka, Ivory Coast (Cote d'Ivoire), India, Cyprus, Sweden, Poland, Central African Republic, Iceland, Lesotho, Congo, Democratic Republic of (DRC), Kosovo, Mexico

https://kdrobotkit.com/product/gravity-analog-water-pressure-sensor/

1.75mm-PLA-Fluorescent Yellow (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Fluorescent Yellow)

COUNTRIES WE SHIP TO

Azerbaijan, Guadeloupe, Syria, Denmark, Japan, Uruguay, Turkmenistan, Liechtenstein, Yemen, Argentina, Saint Kitts and Nevis, Venezuela, Korea, Democratic Republic of (North Korea), Cuba, Zimbabwe, Burundi, Togo, Canada, Guinea-Bissau, Peru, Maldives, Vietnam, Guatemala, Cyprus, Spain, Turks & Caicos Islands, Georgia, Gabon, Bangladesh, Mozambique, Cameroon, China - Hong Kong / Macau, Lebanon, Morocco, Gambia, Belgium, Pakistan, Norway, Afghanistan, Turkey, Nepal, Czech Republic, Papua New Guinea, Cape Verde, Malawi, Samoa, Myanmar/Burma, Switzerland, Mauritania, Dominican Republic, Namibia, Slovak Republic (Slovakia), Uzbekistan, Kazakhstan, Albania, India, Colombia, Ukraine, Seychelles, Luxembourg, Liberia, Madagascar, France, Philippines, El Salvador, Senegal, Austria, Eritrea, Belarus, Cayman Islands, Mali, Comoros, Congo, Algeria, Barbados, Kosovo, Bulgaria, Kuwait, Romania, Fiji, Monaco, Guyana, Tajikistan, Australia, Saudi Arabia, Lesotho, Uganda, Bhutan, Great Britain, Qatar, Martinique, Iran, Saint Lucia, New Zealand, Bahamas, Poland, Suriname, Sri Lanka, Kenya, Montserrat, China, Botswana, Niger, Solomon Islands, Ivory Coast (Cote d'Ivoire), Hungary, Somalia, Finland, Timor Leste, Kyrgyz Republic (Kyrgyzstan), Croatia, Andorra, Latvia, Rwanda, Chad, Moldova, Republic of, Ghana, Libya, South Africa, Virgin Islands (US), Malaysia, Laos, Bermuda, Trinidad & Tobago, Antigua & Barbuda, Sudan, Mayotte, Montenegro, Virgin Islands (UK), Zambia, Mongolia, Panama, Slovenia, Anguilla, Estonia, Cambodia, Bolivia, Brunei Darussalam, Djibouti, Central African Republic, Tunisia, Ecuador, Belize, United Arab Emirates, Haiti, Macedonia, Republic of, Guinea, Brazil, Armenia, Iceland, Nicaragua, Costa Rica, Swaziland, Netherlands, Mexico, Lithuania, Germany, South Sudan, Sierra Leone, Saint Vincent and the Grenadines, Bahrain, Benin, Sweden, Malta, Jamaica, Egypt, Ethiopia, Grenada, Tanzania, Burkina Faso, Dominica, Singapore, Mauritius, Equatorial Guinea, Korea, Republic of (South Korea), Russian Federation, Jordan, Oman, Indonesia, Bosnia & Herzegovina, Serbia, French Guiana, Congo, Democratic Republic of (DRC), Portugal, Paraguay, Italy, United States of America (USA), Iraq, Thailand, Puerto Rico, Honduras, Chile, Pacific Islands, Reunion, Nigeria, Sao Tome and Principe, Greece, Israel and the Occupied Territories, Angola

https://kdrobotkit.com/product/1-75mm-pla-fluorescent-yellow-1kg/

1.75mm-PLA-Sliver (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Sliver)

COUNTRIES WE SHIP TO

Montserrat, Saint Vincent and the Grenadines, Nepal, Qatar, Poland, Pacific Islands, Ghana, Angola, Turks & Caicos Islands, Oman, Saudi Arabia, Denmark, New Zealand, Bahrain, Pakistan, United States of America (USA), Netherlands, Algeria, Bangladesh, Tanzania, Bermuda, Mozambique, Reunion, Kosovo, Armenia, Israel and the Occupied Territories, Maldives, Uruguay, Anguilla, Congo, Democratic Republic of (DRC), Panama, Guinea-Bissau, Samoa, Uzbekistan, Equatorial Guinea, Botswana, Latvia, Nicaragua, Vietnam, Spain, Kyrgyz Republic (Kyrgyzstan), Guadeloupe, Azerbaijan, Comoros, Chile, Iraq, Argentina, Martinique, Dominican Republic, Thailand, Liechtenstein, Guinea, Zimbabwe, Virgin Islands (UK), Guyana, Virgin Islands (US), Costa Rica, Kenya, Afghanistan, Somalia, Malaysia, El Salvador, Dominica, Sierra Leone, Egypt, Honduras, South Sudan, Singapore, Rwanda, Tajikistan, Slovenia, Burundi, Slovak Republic (Slovakia), Belize, Cape Verde, Mauritania, Liberia, Germany, Brunei Darussalam, Yemen, Papua New Guinea, Paraguay, Saint Kitts and Nevis, Iran, Ethiopia, Swaziland, Zambia, Uganda, Serbia, Jordan, France, Greece, Gambia, Montenegro, Eritrea, Senegal, Macedonia, Republic of, Croatia, Seychelles, Syria, Sri Lanka, Puerto Rico, Cambodia, Georgia, United Arab Emirates, Kuwait, Hungary, Finland, China - Hong Kong / Macau, Suriname, Congo, Jamaica, Luxembourg, Cyprus, Canada, Great Britain, Philippines, Sao Tome and Principe, Bahamas, Lithuania, Nigeria, Romania, Myanmar/Burma, Bhutan, Colombia, Ivory Coast (Cote d'Ivoire), Albania, Austria, Malawi, Malta, China, Iceland, Gabon, Togo, Cameroon, Monaco, Barbados, Estonia, Korea, Democratic Republic of (North Korea), Belarus, Fiji, Andorra, Brazil, Bolivia, Sweden, Saint Lucia, Indonesia, Timor Leste, Niger, Trinidad & Tobago, Cuba, Kazakhstan, Chad, Mongolia, Solomon Islands, Central African Republic, Moldova, Republic of, Ecuador, Venezuela, Bulgaria, Mexico, Mali, Antigua & Barbuda, Madagascar, Korea, Republic of (South Korea), French Guiana, Lesotho, Mayotte, Portugal, Turkmenistan, Switzerland, Burkina Faso, Peru, Haiti, Tunisia, Guatemala, Bosnia & Herzegovina, Belgium, Benin, Norway, Australia, Morocco, Lebanon, Sudan, Namibia, India, Turkey, Mauritius, Cayman Islands, Libya, Japan, Djibouti, Laos, Russian Federation, South Africa, Czech Republic, Ukraine, Grenada, Italy

https://kdrobotkit.com/product/1-75mm-pla-sliver-1kg/

1.75mm-PLA-Purple (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Purple)

COUNTRIES WE SHIP TO

Tajikistan, Sierra Leone, Guatemala, Israel and the Occupied Territories, Haiti, Paraguay, Algeria, Vietnam, Macedonia, Republic of, Iraq, Burundi, Cyprus, Laos, Ivory Coast (Cote d'Ivoire), Bahrain, Saint Kitts and Nevis, Korea, Democratic Republic of (North Korea), Sudan, Denmark, Guadeloupe, Suriname, Sao Tome and Principe, Tunisia, Anguilla, Mexico, Qatar, Jordan, Equatorial Guinea, Botswana, Kazakhstan, Samoa, Antigua & Barbuda, Serbia, Cape Verde, Nepal, Poland, France, New Zealand, Libya, Maldives, Niger, Bermuda, Iran, Angola, Barbados, Croatia, Korea, Republic of (South Korea), Azerbaijan, Philippines, Cameroon, Ethiopia, Guinea-Bissau, Slovenia, Honduras, Tanzania, El Salvador, Oman, Sweden, Mauritius, Andorra, Turkmenistan, Morocco, Guinea, Norway, Mauritania, Hungary, Malaysia, Malta, Myanmar/Burma, South Africa, Somalia, Japan, Monaco, Madagascar, Germany, South Sudan, Peru, Turks & Caicos Islands, Albania, Slovak Republic (Slovakia), Puerto Rico, India, Turkey, Switzerland, Belarus, China - Hong Kong / Macau, Venezuela, Netherlands, Nigeria, Costa Rica, Italy, Argentina, Zimbabwe, Uruguay, Iceland, Belize, Lithuania, Bahamas, Indonesia, Gabon, Solomon Islands, Sri Lanka, Congo, Burkina Faso, Liberia, Pakistan, Seychelles, Comoros, Cayman Islands, Canada, Dominica, Grenada, Montenegro, China, Bolivia, United States of America (USA), Timor Leste, Fiji, Guyana, Bhutan, Saudi Arabia, Kenya, Uzbekistan, Spain, Dominican Republic, Saint Vincent and the Grenadines, Moldova, Republic of, Zambia, Jamaica, Bangladesh, Central African Republic, Brazil, Belgium, Great Britain, Afghanistan, Virgin Islands (UK), Uganda, Czech Republic, Bosnia & Herzegovina, Mayotte, Mozambique, United Arab Emirates, Ukraine, Syria, Nicaragua, Brunei Darussalam, Lebanon, Portugal, Singapore, Greece, Swaziland, Pacific Islands, Virgin Islands (US), Colombia, Yemen, Djibouti, Malawi, Romania, Estonia, Martinique, Gambia, Cuba, Congo, Democratic Republic of (DRC), Austria, Bulgaria, Ghana, Georgia, Montserrat, Luxembourg, Trinidad & Tobago, Thailand, Kyrgyz Republic (Kyrgyzstan), Kosovo, Cambodia, Russian Federation, Liechtenstein, Latvia, French Guiana, Namibia, Chad, Benin, Mongolia, Papua New Guinea, Ecuador, Kuwait, Egypt, Rwanda, Panama, Senegal, Togo, Reunion, Chile, Lesotho, Finland, Mali, Eritrea, Australia, Saint Lucia, Armenia

https://kdrobotkit.com/product/1-75mm-pla-purple-1kg/

1.75mm-PLA-Orange (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Orange)

COUNTRIES WE SHIP TO

Timor Leste, Bulgaria, South Africa, Lithuania, Guatemala, Venezuela, Laos, Trinidad & Tobago, Turkmenistan, Belize, Reunion, Philippines, Cayman Islands, Comoros, United States of America (USA), Luxembourg, Malaysia, Kazakhstan, Dominica, Switzerland, Bangladesh, Turkey, Kyrgyz Republic (Kyrgyzstan), Saint Vincent and the Grenadines, Swaziland, Mexico, Eritrea, Colombia, China, Central African Republic, Virgin Islands (UK), Australia, Bahamas, Seychelles, Poland, Romania, Guinea, Paraguay, Slovenia, Sweden, Cape Verde, Argentina, Uzbekistan, Saint Kitts and Nevis, Ukraine, Guinea-Bissau, Angola, Thailand, Namibia, Slovak Republic (Slovakia), Bhutan, Netherlands, Malta, Burundi, El Salvador, Kuwait, Libya, Mali, Ivory Coast (Cote d'Ivoire), Mauritania, Pakistan, Qatar, Lesotho, Korea, Democratic Republic of (North Korea), Canada, Bosnia & Herzegovina, Papua New Guinea, Azerbaijan, Liechtenstein, Mozambique, Portugal, Malawi, Georgia, Zambia, Hungary, Cameroon, Latvia, United Arab Emirates, Djibouti, Puerto Rico, Croatia, Chad, Suriname, Somalia, Tanzania, Korea, Republic of (South Korea), Albania, Norway, China - Hong Kong / Macau, Gambia, Serbia, Iceland, Dominican Republic, Cambodia, Anguilla, Austria, Virgin Islands (US), Belgium, Turks & Caicos Islands, Jamaica, Botswana, Pacific Islands, France, Niger, Barbados, Congo, Democratic Republic of (DRC), Tunisia, Gabon, New Zealand, Brazil, Bahrain, Ethiopia, Greece, Mongolia, Macedonia, Republic of, Vietnam, Jordan, Czech Republic, Finland, Saint Lucia, Armenia, India, Bermuda, Moldova, Republic of, Mayotte, Sudan, Israel and the Occupied Territories, Myanmar/Burma, Haiti, Egypt, South Sudan, Benin, Denmark, Germany, Grenada, Honduras, Oman, Andorra, Belarus, Senegal, Samoa, Costa Rica, Indonesia, Spain, Italy, Congo, Sri Lanka, Syria, Madagascar, Iran, Nigeria, Nepal, Panama, Morocco, Guadeloupe, Zimbabwe, Monaco, Rwanda, Sierra Leone, Kenya, Uganda, Lebanon, Burkina Faso, Afghanistan, Montenegro, Antigua & Barbuda, Togo, Estonia, Iraq, Mauritius, Equatorial Guinea, French Guiana, Solomon Islands, Russian Federation, Maldives, Great Britain, Kosovo, Fiji, Montserrat, Uruguay, Cuba, Yemen, Tajikistan, Singapore, Guyana, Bolivia, Liberia, Ecuador, Brunei Darussalam, Nicaragua, Peru, Saudi Arabia, Chile, Cyprus, Algeria, Martinique, Japan, Ghana, Sao Tome and Principe

https://kdrobotkit.com/product/1-75mm-pla-orange-1kg/

1.75mm-PLA-White (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (White)

COUNTRIES WE SHIP TO

Cuba, Liechtenstein, Portugal, Bahamas, Uganda, Lebanon, Ecuador, Algeria, Bulgaria, Puerto Rico, Pakistan, French Guiana, Bolivia, Kuwait, Uzbekistan, Slovak Republic (Slovakia), Trinidad & Tobago, Laos, Cape Verde, Panama, Solomon Islands, Croatia, Oman, Korea, Democratic Republic of (North Korea), Kyrgyz Republic (Kyrgyzstan), Guinea, Switzerland, Cameroon, Estonia, Mauritius, Korea, Republic of (South Korea), Bangladesh, Pacific Islands, Colombia, Gabon, South Sudan, Zimbabwe, Romania, Libya, Latvia, Yemen, Finland, Mali, Haiti, Anguilla, United Arab Emirates, Mozambique, China - Hong Kong / Macau, Seychelles, Reunion, Turks & Caicos Islands, Kenya, Poland, Sri Lanka, Venezuela, Timor Leste, Fiji, Australia, Saudi Arabia, Thailand, Germany, Malaysia, Burkina Faso, Kazakhstan, Jamaica, Congo, Democratic Republic of (DRC), Burundi, Indonesia, Italy, Belgium, Djibouti, Denmark, Virgin Islands (UK), Maldives, Bosnia & Herzegovina, Netherlands, Georgia, Ghana, Peru, Guinea-Bissau, Uruguay, Spain, Bahrain, Hungary, Papua New Guinea, Mauritania, Ukraine, Saint Kitts and Nevis, New Zealand, Norway, Angola, Czech Republic, Bermuda, Albania, Senegal, India, South Africa, Madagascar, Japan, Ethiopia, Martinique, Monaco, Honduras, Russian Federation, Vietnam, Slovenia, Malawi, Saint Vincent and the Grenadines, Lithuania, Namibia, Guadeloupe, Jordan, Eritrea, El Salvador, Great Britain, Sudan, United States of America (USA), Armenia, Liberia, Singapore, Equatorial Guinea, Kosovo, Dominica, Cayman Islands, Austria, Argentina, Sierra Leone, Virgin Islands (US), Costa Rica, Malta, Turkmenistan, Mayotte, Nigeria, Brunei Darussalam, Syria, Guatemala, Moldova, Republic of, Mexico, Israel and the Occupied Territories, Congo, Lesotho, Philippines, Myanmar/Burma, Montserrat, Andorra, Grenada, Paraguay, Nepal, France, Cyprus, Chad, Tajikistan, Togo, Luxembourg, Mongolia, Bhutan, Barbados, Belize, Saint Lucia, Antigua & Barbuda, Botswana, Serbia, Canada, Belarus, Chile, Egypt, Sao Tome and Principe, Zambia, Samoa, Tunisia, Comoros, Macedonia, Republic of, Dominican Republic, Iceland, China, Niger, Brazil, Iraq, Tanzania, Azerbaijan, Afghanistan, Nicaragua, Central African Republic, Cambodia, Morocco, Qatar, Ivory Coast (Cote d'Ivoire), Guyana, Gambia, Montenegro, Somalia, Turkey, Rwanda, Swaziland, Iran, Greece, Benin, Suriname, Sweden

https://kdrobotkit.com/product/1-75mm-pla-white-1kg/

1.75mm-PLA-Fluorescent Red (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Fluorescent Red)

COUNTRIES WE SHIP TO

Trinidad & Tobago, Yemen, Pacific Islands, Vietnam, Egypt, Lithuania, Sweden, Sudan, Fiji, Costa Rica, Bolivia, Singapore, Oman, Malawi, Philippines, Morocco, Uruguay, Ethiopia, Gabon, Cyprus, Canada, Switzerland, Mozambique, Portugal, Paraguay, Venezuela, Korea, Republic of (South Korea), Chad, Mongolia, Saint Lucia, Bulgaria, Malaysia, Kosovo, Grenada, Guinea-Bissau, Spain, China - Hong Kong / Macau, Germany, Saudi Arabia, Honduras, Argentina, Monaco, Denmark, Armenia, Togo, Virgin Islands (US), Gambia, United Arab Emirates, Romania, Guinea, Zimbabwe, Somalia, Mauritius, Ukraine, Kuwait, Ghana, Netherlands, Macedonia, Republic of, Dominica, Antigua & Barbuda, Syria, French Guiana, Albania, Nigeria, Latvia, Burkina Faso, Sri Lanka, Cameroon, Saint Vincent and the Grenadines, Eritrea, Finland, Burundi, Slovak Republic (Slovakia), Austria, Rwanda, Japan, Cuba, Italy, Libya, Moldova, Republic of, Kazakhstan, Thailand, Guyana, Montenegro, Ivory Coast (Cote d'Ivoire), Angola, Colombia, Serbia, South Sudan, Uzbekistan, Bhutan, Equatorial Guinea, Guadeloupe, Tajikistan, Algeria, Jamaica, Namibia, Mexico, Israel and the Occupied Territories, Iran, Suriname, Saint Kitts and Nevis, Maldives, Sierra Leone, Georgia, Mauritania, Anguilla, Czech Republic, Estonia, Andorra, Tanzania, Djibouti, Zambia, Lebanon, Niger, Reunion, Slovenia, Afghanistan, Belarus, Montserrat, Indonesia, Russian Federation, Iraq, New Zealand, Kenya, Swaziland, Mali, Panama, Congo, Democratic Republic of (DRC), Bangladesh, Norway, El Salvador, Kyrgyz Republic (Kyrgyzstan), Papua New Guinea, Malta, Botswana, Brazil, Liberia, Martinique, Brunei Darussalam, Belgium, Turks & Caicos Islands, Cambodia, Australia, Seychelles, Great Britain, Hungary, Virgin Islands (UK), Croatia, Madagascar, Comoros, Turkmenistan, Bosnia & Herzegovina, Iceland, Samoa, Congo, Turkey, Laos, Cape Verde, Greece, Haiti, Myanmar/Burma, South Africa, Tunisia, Bahrain, United States of America (USA), India, Luxembourg, Bahamas, Mayotte, Barbados, Poland, Korea, Democratic Republic of (North Korea), Senegal, Nicaragua, Belize, Bermuda, Azerbaijan, Liechtenstein, Dominican Republic, Solomon Islands, Pakistan, Cayman Islands, Timor Leste, Uganda, Sao Tome and Principe, Nepal, Guatemala, Benin, Puerto Rico, China, Peru, France, Central African Republic, Jordan, Ecuador, Chile, Qatar, Lesotho

https://kdrobotkit.com/product/1-75mm-pla-fluorescent-red-1kg/

1.75mm-PLA-Gold (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Gold)

COUNTRIES WE SHIP TO

Mauritania, Mali, Indonesia, Korea, Democratic Republic of (North Korea), Antigua & Barbuda, Mongolia, Belize, Latvia, Greece, Azerbaijan, Venezuela, Uruguay, Sao Tome and Principe, Pakistan, Bangladesh, Ghana, Solomon Islands, Timor Leste, Laos, Gambia, China, Albania, Niger, Nepal, Virgin Islands (US), Finland, Bahrain, Great Britain, Bulgaria, Peru, El Salvador, Djibouti, Korea, Republic of (South Korea), Saint Kitts and Nevis, Slovenia, Rwanda, Guinea-Bissau, Haiti, Costa Rica, Saudi Arabia, Guatemala, Samoa, Paraguay, Dominican Republic, Cuba, Israel and the Occupied Territories, South Sudan, Afghanistan, South Africa, Ecuador, Pacific Islands, Myanmar/Burma, Malaysia, Lesotho, Chile, Uganda, Somalia, Philippines, Eritrea, Guyana, Oman, Malawi, Guinea, Zambia, Iran, Malta, Estonia, Burundi, Moldova, Republic of, Chad, Brunei Darussalam, Syria, Mayotte, Sierra Leone, Brazil, Morocco, Kyrgyz Republic (Kyrgyzstan), Egypt, Puerto Rico, Jamaica, Spain, Kuwait, Saint Lucia, Burkina Faso, Namibia, Virgin Islands (UK), Mexico, Cape Verde, Gabon, Jordan, Senegal, Congo, Democratic Republic of (DRC), French Guiana, Montserrat, Yemen, Iceland, Central African Republic, Benin, Italy, Japan, Canada, Liechtenstein, Hungary, Sri Lanka, Grenada, Dominica, Cameroon, Singapore, Luxembourg, Bosnia & Herzegovina, Sudan, United States of America (USA), Tunisia, Uzbekistan, Belgium, Kosovo, Zimbabwe, Norway, Bolivia, Argentina, Portugal, Saint Vincent and the Grenadines, Guadeloupe, Tajikistan, China - Hong Kong / Macau, Belarus, United Arab Emirates, Seychelles, Montenegro, Iraq, Panama, Turks & Caicos Islands, Maldives, Lebanon, Suriname, Equatorial Guinea, Togo, Kenya, Cyprus, France, Bhutan, Denmark, Romania, Trinidad & Tobago, Bermuda, Martinique, Swaziland, Botswana, Cambodia, Ivory Coast (Cote d'Ivoire), Macedonia, Republic of, Slovak Republic (Slovakia), Mauritius, Lithuania, Angola, Andorra, Nicaragua, Switzerland, Turkey, New Zealand, Armenia, Fiji, Cayman Islands, Anguilla, Monaco, Barbados, Nigeria, Turkmenistan, Russian Federation, Georgia, Thailand, Ukraine, Austria, Congo, Tanzania, Liberia, Serbia, Croatia, Algeria, Colombia, Poland, Kazakhstan, Ethiopia, India, Mozambique, Papua New Guinea, Madagascar, Czech Republic, Australia, Comoros, Netherlands, Bahamas, Vietnam, Honduras, Germany, Reunion, Qatar, Sweden, Libya

https://kdrobotkit.com/product/1-75mm-pla-gold-1kg/

1.75mm-PLA-Shocking Pink (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Shocking Pink)

COUNTRIES WE SHIP TO

Liberia, United Arab Emirates, Vietnam, Ivory Coast (Cote d'Ivoire), Chad, Seychelles, Equatorial Guinea, Congo, Ethiopia, Cambodia, Botswana, Mauritius, Saint Kitts and Nevis, Tajikistan, China, Korea, Republic of (South Korea), Lesotho, Burkina Faso, Malaysia, Eritrea, Japan, Serbia, Namibia, Guinea, Nepal, India, Trinidad & Tobago, Argentina, Singapore, Comoros, Ecuador, Great Britain, Panama, Armenia, Ukraine, Solomon Islands, Mongolia, Swaziland, Timor Leste, South Sudan, Afghanistan, Mozambique, Croatia, Korea, Democratic Republic of (North Korea), Dominican Republic, Oman, Pakistan, France, Paraguay, Ghana, Libya, Kazakhstan, Spain, Albania, Saint Vincent and the Grenadines, Djibouti, Anguilla, Niger, Israel and the Occupied Territories, Bangladesh, Papua New Guinea, Zimbabwe, Qatar, Honduras, Philippines, Germany, Bulgaria, Mexico, Costa Rica, Mayotte, Rwanda, Brunei Darussalam, Samoa, Hungary, Romania, Zambia, Syria, Uganda, El Salvador, Iceland, China - Hong Kong / Macau, Kenya, Bolivia, Suriname, Indonesia, Iran, Guatemala, Bermuda, Puerto Rico, Chile, Venezuela, Italy, Dominica, Madagascar, Malta, Denmark, Pacific Islands, Czech Republic, Fiji, Yemen, Haiti, Antigua & Barbuda, Barbados, Cape Verde, Virgin Islands (US), Luxembourg, Australia, Benin, Malawi, Algeria, Burundi, Tanzania, Estonia, Moldova, Republic of, Somalia, Liechtenstein, Belgium, Guadeloupe, Peru, Austria, Virgin Islands (UK), Bosnia & Herzegovina, Azerbaijan, Sao Tome and Principe, Lebanon, Morocco, Cameroon, Brazil, Uruguay, Canada, Saint Lucia, Cayman Islands, Bahrain, Togo, Montenegro, Thailand, Slovenia, Tunisia, Sierra Leone, United States of America (USA), Slovak Republic (Slovakia), Egypt, Guyana, Jordan, Belize, Iraq, Sudan, Cyprus, Kuwait, Belarus, Jamaica, Gabon, Kosovo, Mali, Norway, Monaco, Angola, Latvia, Russian Federation, Turks & Caicos Islands, Andorra, Turkmenistan, Guinea-Bissau, Kyrgyz Republic (Kyrgyzstan), Congo, Democratic Republic of (DRC), Portugal, Uzbekistan, Sri Lanka, Maldives, Mauritania, French Guiana, Cuba, Finland, Turkey, Myanmar/Burma, Greece, Bhutan, Netherlands, Sweden, Nigeria, Macedonia, Republic of, Senegal, Laos, Gambia, Central African Republic, Montserrat, Switzerland, New Zealand, Martinique, Reunion, Lithuania, Colombia, Bahamas, Nicaragua, South Africa, Grenada, Saudi Arabia, Georgia, Poland

https://kdrobotkit.com/product/1-75mm-pla-shocking-pink-1kg/

1.75mm-PLA-Transparent (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Transparent)

COUNTRIES WE SHIP TO

Iran, Belarus, Bangladesh, Libya, Andorra, Spain, Thailand, Ghana, Guinea, Japan, Argentina, India, Armenia, Saint Vincent and the Grenadines, Laos, French Guiana, Bahrain, Gabon, South Africa, Liechtenstein, Kuwait, Kosovo, Virgin Islands (US), Tunisia, Seychelles, Italy, Uganda, Afghanistan, Serbia, Greece, Timor Leste, Sweden, Belize, Bermuda, Honduras, Turks & Caicos Islands, United States of America (USA), Ecuador, Paraguay, Jordan, Uzbekistan, Netherlands, France, Romania, Equatorial Guinea, Myanmar/Burma, Korea, Democratic Republic of (North Korea), Togo, Portugal, Great Britain, Mauritania, Slovenia, Sri Lanka, Solomon Islands, Vietnam, Virgin Islands (UK), Russian Federation, China, Philippines, Nepal, Angola, Chad, Congo, Ivory Coast (Cote d'Ivoire), Guinea-Bissau, Macedonia, Republic of, Djibouti, Mongolia, Dominican Republic, Canada, Mozambique, Iraq, Oman, Bulgaria, Samoa, Cameroon, Panama, Dominica, Reunion, Mexico, Azerbaijan, Estonia, Czech Republic, Turkmenistan, Bosnia & Herzegovina, Suriname, Malawi, Sudan, Switzerland, Rwanda, Bolivia, Burkina Faso, Monaco, Colombia, Luxembourg, Mali, South Sudan, Denmark, Swaziland, Georgia, Malta, Puerto Rico, Morocco, El Salvador, Montenegro, Congo, Democratic Republic of (DRC), Kazakhstan, Indonesia, Eritrea, Finland, Pacific Islands, Nigeria, Niger, Benin, Cape Verde, Tanzania, Brunei Darussalam, Anguilla, Venezuela, Chile, Algeria, Fiji, Croatia, Cyprus, New Zealand, Sao Tome and Principe, Moldova, Republic of, Comoros, Jamaica, Burundi, Israel and the Occupied Territories, Bahamas, Barbados, Poland, Costa Rica, United Arab Emirates, Ethiopia, Guadeloupe, Guyana, Nicaragua, Pakistan, Central African Republic, Lebanon, Tajikistan, Korea, Republic of (South Korea), Papua New Guinea, Guatemala, Iceland, Cuba, Syria, Germany, Antigua & Barbuda, Zimbabwe, Austria, Namibia, Saint Lucia, Saint Kitts and Nevis, Kenya, Mauritius, Bhutan, Lesotho, Albania, Australia, Cambodia, Belgium, Peru, Martinique, Qatar, Somalia, Slovak Republic (Slovakia), Kyrgyz Republic (Kyrgyzstan), Norway, Cayman Islands, Ukraine, Madagascar, Lithuania, Saudi Arabia, Singapore, Mayotte, Grenada, Hungary, Yemen, Turkey, Sierra Leone, Haiti, Uruguay, Trinidad & Tobago, Malaysia, Botswana, Brazil, Senegal, Gambia, Zambia, Montserrat, Latvia, Maldives, China - Hong Kong / Macau, Egypt, Liberia

https://kdrobotkit.com/product/1-75mm-pla-transparent-1kg/

1.75mm-PLA-Natural (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Natural)

COUNTRIES WE SHIP TO

Namibia, Chile, Mauritius, Slovenia, Cyprus, Niger, Mauritania, Bolivia, Guatemala, Uzbekistan, Bangladesh, Somalia, Gambia, Guinea-Bissau, Mayotte, Sri Lanka, Burundi, Serbia, Monaco, Luxembourg, Angola, Lebanon, Iraq, Azerbaijan, Montenegro, Peru, Belgium, Congo, China, Guinea, Martinique, Tanzania, Togo, Bosnia & Herzegovina, Nicaragua, Turks & Caicos Islands, Colombia, Virgin Islands (US), Iran, Montserrat, Sierra Leone, Malawi, Myanmar/Burma, Brunei Darussalam, Czech Republic, Vietnam, Uruguay, Maldives, Japan, Great Britain, Swaziland, Tunisia, Portugal, Bahamas, Bulgaria, Ecuador, Liechtenstein, Georgia, Poland, Kuwait, Netherlands, Eritrea, Madagascar, Honduras, Austria, Hungary, Pacific Islands, Saint Lucia, Burkina Faso, Puerto Rico, Djibouti, Kenya, Finland, Ghana, Samoa, Fiji, Haiti, Bhutan, South Africa, Anguilla, Cambodia, Greece, Canada, Korea, Democratic Republic of (North Korea), Qatar, Paraguay, Panama, Virgin Islands (UK), Romania, Oman, Central African Republic, Cameroon, Belarus, Turkmenistan, Ivory Coast (Cote d'Ivoire), Uganda, Chad, Lesotho, Yemen, New Zealand, Guadeloupe, France, Lithuania, Libya, Slovak Republic (Slovakia), Dominican Republic, Barbados, Timor Leste, South Sudan, Sudan, Denmark, Cuba, Suriname, Armenia, Turkey, Reunion, Ethiopia, Russian Federation, Nigeria, Liberia, Saint Vincent and the Grenadines, Rwanda, French Guiana, Dominica, Mexico, Andorra, Bermuda, Cayman Islands, Saudi Arabia, United States of America (USA), Italy, India, Switzerland, Latvia, Croatia, Laos, Botswana, Spain, Solomon Islands, Belize, Pakistan, Mozambique, Mali, Algeria, United Arab Emirates, Morocco, Gabon, Indonesia, Sao Tome and Principe, Equatorial Guinea, Brazil, Grenada, El Salvador, Moldova, Republic of, Germany, Afghanistan, Kyrgyz Republic (Kyrgyzstan), Sweden, Kazakhstan, Comoros, Zambia, Argentina, Benin, Nepal, Papua New Guinea, Jordan, Israel and the Occupied Territories, Korea, Republic of (South Korea), Australia, China - Hong Kong / Macau, Bahrain, Trinidad & Tobago, Antigua & Barbuda, Egypt, Costa Rica, Jamaica, Senegal, Malaysia, Ukraine, Estonia, Congo, Democratic Republic of (DRC), Malta, Cape Verde, Albania, Philippines, Venezuela, Mongolia, Iceland, Saint Kitts and Nevis, Thailand, Zimbabwe, Singapore, Guyana, Norway, Syria, Seychelles, Macedonia, Republic of, Kosovo, Tajikistan

https://kdrobotkit.com/product/1-75mm-pla-natural-1kg/

1.75mm-PLA-Black (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Black)

COUNTRIES WE SHIP TO

Saint Lucia, Ethiopia, Slovak Republic (Slovakia), Bahamas, Georgia, Sierra Leone, Guadeloupe, Papua New Guinea, Peru, Sweden, Qatar, Central African Republic, Monaco, Argentina, Rwanda, Andorra, Honduras, Mozambique, Saudi Arabia, Suriname, Trinidad & Tobago, Dominica, Chad, Guinea-Bissau, Kazakhstan, Mauritius, Great Britain, Czech Republic, Cuba, Solomon Islands, Gabon, Canada, Swaziland, Maldives, Libya, Barbados, Malaysia, Japan, Mauritania, Tunisia, Algeria, Italy, Congo, Mayotte, Nicaragua, Ukraine, Austria, Brunei Darussalam, Korea, Republic of (South Korea), Syria, Grenada, Bermuda, Benin, Bulgaria, Burundi, Tajikistan, Namibia, Venezuela, Dominican Republic, China, Portugal, Antigua & Barbuda, Thailand, Ecuador, Guatemala, Virgin Islands (US), Paraguay, French Guiana, Morocco, Liechtenstein, Pakistan, Cayman Islands, Singapore, Nigeria, Sudan, Somalia, Egypt, Gambia, Denmark, Haiti, Slovenia, Togo, United Arab Emirates, Cape Verde, Spain, Russian Federation, Montserrat, Greece, Iran, Kyrgyz Republic (Kyrgyzstan), Sao Tome and Principe, Lesotho, Martinique, Bhutan, South Africa, Croatia, Angola, Cambodia, Bangladesh, Kenya, Mongolia, Romania, Vietnam, Lebanon, Moldova, Republic of, Belgium, Turks & Caicos Islands, Uzbekistan, Azerbaijan, Ghana, Luxembourg, New Zealand, Samoa, Guyana, Eritrea, Djibouti, Nepal, Indonesia, Comoros, Hungary, Uganda, Guinea, China - Hong Kong / Macau, Virgin Islands (UK), Finland, Yemen, Puerto Rico, Reunion, Iceland, Myanmar/Burma, Tanzania, Germany, Turkmenistan, France, Cyprus, Estonia, United States of America (USA), Bosnia & Herzegovina, Fiji, Malawi, Colombia, El Salvador, Senegal, Liberia, Bolivia, Australia, Anguilla, Seychelles, Timor Leste, Niger, Jamaica, Zambia, Macedonia, Republic of, Saint Vincent and the Grenadines, South Sudan, Laos, Netherlands, Switzerland, Albania, Kosovo, Iraq, Lithuania, Brazil, Cameroon, Malta, Norway, Chile, Botswana, Armenia, Montenegro, Equatorial Guinea, Poland, Panama, Jordan, Uruguay, Serbia, Philippines, Pacific Islands, Saint Kitts and Nevis, Bahrain, Mexico, Zimbabwe, Madagascar, Turkey, Belarus, Congo, Democratic Republic of (DRC), Latvia, Afghanistan, Belize, Kuwait, Mali, Korea, Democratic Republic of (North Korea), Oman, India, Sri Lanka, Burkina Faso, Costa Rica, Ivory Coast (Cote d'Ivoire), Israel and the Occupied Territories

https://kdrobotkit.com/product/1-75mm-pla-black-1kg/

1.75mm-PLA-Red (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Red)

COUNTRIES WE SHIP TO

Myanmar/Burma, Venezuela, Sweden, Spain, Ethiopia, Malawi, Jordan, Chad, France, Peru, Yemen, Colombia, Georgia, Belarus, Swaziland, Russian Federation, Uganda, Somalia, Canada, Seychelles, Congo, Democratic Republic of (DRC), Maldives, Bhutan, Antigua & Barbuda, Syria, South Africa, Guadeloupe, Grenada, Mauritius, Great Britain, Solomon Islands, Liberia, Malaysia, Germany, Ivory Coast (Cote d'Ivoire), Nigeria, Czech Republic, Gabon, Costa Rica, Uzbekistan, Sudan, Azerbaijan, Bulgaria, China - Hong Kong / Macau, Albania, Lesotho, Rwanda, Cuba, Laos, Guinea, Lebanon, Kosovo, Korea, Democratic Republic of (North Korea), Malta, Botswana, Bahamas, Timor Leste, Vietnam, Mayotte, Sri Lanka, Martinique, Armenia, Equatorial Guinea, Kyrgyz Republic (Kyrgyzstan), Cayman Islands, New Zealand, Kuwait, Togo, French Guiana, Senegal, Poland, Iraq, Pakistan, El Salvador, Puerto Rico, Zambia, Latvia, Italy, Austria, Ukraine, Comoros, Bosnia & Herzegovina, Papua New Guinea, Philippines, Samoa, Japan, Burkina Faso, United States of America (USA), Morocco, Gambia, Congo, Virgin Islands (US), Belgium, Brazil, Benin, Cambodia, Trinidad & Tobago, Afghanistan, Bahrain, Zimbabwe, Guatemala, Burundi, Madagascar, Andorra, Netherlands, Turkmenistan, Finland, Djibouti, Algeria, Thailand, Singapore, Honduras, Fiji, Monaco, Barbados, Croatia, Portugal, Nicaragua, Niger, Estonia, Korea, Republic of (South Korea), Saint Kitts and Nevis, Angola, Denmark, Israel and the Occupied Territories, Sierra Leone, Hungary, South Sudan, Mexico, Saudi Arabia, Libya, Luxembourg, Mozambique, Namibia, Dominica, Qatar, Greece, Anguilla, Haiti, Mali, Liechtenstein, Romania, Montenegro, Ghana, Mauritania, Reunion, Australia, Sao Tome and Principe, Cyprus, Bangladesh, Panama, Suriname, Ecuador, Serbia, Norway, Cameroon, Bolivia, Slovenia, Guyana, Moldova, Republic of, Central African Republic, Oman, Argentina, Turks & Caicos Islands, Guinea-Bissau, Nepal, Kazakhstan, Cape Verde, Mongolia, Uruguay, India, Slovak Republic (Slovakia), Tanzania, Pacific Islands, Egypt, Virgin Islands (UK), Saint Lucia, Dominican Republic, Bermuda, Indonesia, Tunisia, Saint Vincent and the Grenadines, Turkey, Switzerland, Belize, Brunei Darussalam, China, Paraguay, Kenya, Tajikistan, Jamaica, United Arab Emirates, Macedonia, Republic of, Montserrat, Lithuania, Chile, Eritrea, Iceland, Iran

https://kdrobotkit.com/product/1-75mm-pla-red-1kg/

1.75mm-PLA-Yellow (1kg)

INTRODUCTION

PLA is a wonderful material to print in. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.

Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch, tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions.

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

Physical Property Typical value

Tensile Strength@Yield 46Mpa

Tensile Elongation@Break 20%

Flexural Strength 70Mpa

Flexural Modulus 3212Mpa

Notched lzod lmpact(23℃) 5.2kj/㎡

HDT@66psi 58℃

Density 1.31g/cm3

MFR 10-14g/10min

Accuracy 1.75±0.1mm

Net Weight 1Kg

Weight 1.36Kg

PACKING LIST

1.75mm 1Kg 3D Printer PLA Filament (Yellow)

COUNTRIES WE SHIP TO

Guinea-Bissau, China - Hong Kong / Macau, Brunei Darussalam, Bosnia & Herzegovina, Reunion, Spain, Bhutan, Italy, Germany, Korea, Republic of (South Korea), Serbia, Nicaragua, Sweden, Romania, Israel and the Occupied Territories, Zambia, Macedonia, Republic of, Ethiopia, Somalia, Puerto Rico, Djibouti, South Sudan, Rwanda, Costa Rica, Ivory Coast (Cote d'Ivoire), Australia, Uganda, Malaysia, Estonia, Mozambique, Qatar, Virgin Islands (UK), Mauritius, Korea, Democratic Republic of (North Korea), Hungary, Bolivia, Namibia, Virgin Islands (US), Uzbekistan, Afghanistan, Grenada, Uruguay, Suriname, Central African Republic, Kenya, Angola, Kazakhstan, Tajikistan, Burundi, Senegal, Bahamas, Kuwait, Liberia, Egypt, Indonesia, United States of America (USA), Sao Tome and Principe, Malawi, El Salvador, Turkey, Vietnam, Slovenia, Fiji, Saint Kitts and Nevis, Tunisia, Libya, Bermuda, Dominican Republic, Saint Lucia, Jordan, Bangladesh, Myanmar/Burma, Turkmenistan, Latvia, French Guiana, Pakistan, France, Solomon Islands, Cayman Islands, Burkina Faso, Martinique, Azerbaijan, Trinidad & Tobago, Bulgaria, Timor Leste, Zimbabwe, Chile, Maldives, South Africa, Niger, Singapore, Monaco, Colombia, Czech Republic, Finland, Pacific Islands, Comoros, India, United Arab Emirates, Tanzania, Cape Verde, Mayotte, Mali, Cuba, Ukraine, Honduras, Iran, Switzerland, Armenia, Congo, Democratic Republic of (DRC), Brazil, Congo, Denmark, Botswana, Poland, Portugal, Cameroon, Samoa, Japan, Georgia, Cambodia, Seychelles, Sierra Leone, China, Croatia, Saint Vincent and the Grenadines, Montenegro, Togo, Gabon, Moldova, Republic of, Mexico, Madagascar, Belarus, Iceland, Turks & Caicos Islands, Eritrea, Kosovo, Laos, Benin, Morocco, Bahrain, Andorra, Belgium, Liechtenstein, Albania, Great Britain, Lesotho, Haiti, Lebanon, Slovak Republic (Slovakia), Mauritania, Lithuania, Yemen, Saudi Arabia, Malta, Nepal, Syria, Paraguay, Canada, Norway, Iraq, Montserrat, Anguilla, Greece, Jamaica, Chad, Sri Lanka, Panama, Luxembourg, Sudan, Guadeloupe, Austria, Venezuela, Kyrgyz Republic (Kyrgyzstan), Netherlands, Barbados, Papua New Guinea, Oman, New Zealand, Algeria, Argentina, Guyana, Cyprus, Peru, Gambia, Antigua & Barbuda, Philippines, Mongolia, Swaziland, Guatemala, Belize, Russian Federation, Ghana, Ecuador, Dominica, Equatorial Guinea, Thailand, Guinea, Nigeria

https://kdrobotkit.com/product/1-75mm-pla-yellow-1kg/

Raspberry Pi Zero & Zero W Case Pack (Red/White)

INTRODUCTION

This is a special designed Raspberry Pi Zero & Zero W case. It is made of ABS material, and contains 3 kinds of top covers: GPIO cover, camera cover and full cover. We also prepare a camera connection cable for the CSI port.

GPIO Cover

Camera Cover

Full Cover

It is compatible with Raspberry Pi Zero and Zero W.

SPECIFICATION

Models: Raspberry pi Zero, Raspberry pi Zero W

Shell Material: ABS material

Dimension: 76 x 35 x 12 (mm)/ 3 x 1.38 x 0.47 inches

Weight: 20g

FEATURES

ABS Material

Compatible with Raspberry Pi Zero & Zero W

PACKING LIST

Case (includes one base and three covers) x1

Camera adapter cable x1

Silicone holder x4

COUNTRIES WE SHIP TO

Djibouti, Jordan, Swaziland, Burundi, Saint Kitts and Nevis, Greece, Gambia, Papua New Guinea, Botswana, Germany, Saint Vincent and the Grenadines, Andorra, Burkina Faso, Namibia, Belgium, Dominica, China - Hong Kong / Macau, Algeria, Netherlands, Uganda, Ecuador, Luxembourg, Bahamas, Laos, Mozambique, New Zealand, France, Italy, Mayotte, Mexico, Guinea-Bissau, Philippines, Guatemala, Somalia, Kazakhstan, Norway, Zambia, South Africa, Cambodia, Anguilla, French Guiana, Maldives, Bhutan, Gabon, Ukraine, Brunei Darussalam, Kosovo, Oman, Malta, Grenada, Turks & Caicos Islands, Armenia, Ghana, Fiji, Virgin Islands (US), Trinidad & Tobago, Moldova, Republic of, Cape Verde, Virgin Islands (UK), Congo, Korea, Republic of (South Korea), Turkmenistan, Saint Lucia, Venezuela, Ethiopia, Spain, Australia, Cameroon, Hungary, India, Pacific Islands, Israel and the Occupied Territories, Libya, Austria, Ivory Coast (Cote d'Ivoire), Senegal, Serbia, Tanzania, Jamaica, Benin, Uzbekistan, Timor Leste, Egypt, Canada, Belarus, Tajikistan, Morocco, Estonia, Reunion, Lebanon, Togo, Macedonia, Republic of, Slovenia, Suriname, Mongolia, Kenya, Azerbaijan, Cayman Islands, Nicaragua, Bulgaria, Yemen, Lithuania, Saudi Arabia, Czech Republic, Iraq, Qatar, Malawi, Martinique, Bahrain, Haiti, United Arab Emirates, El Salvador, Madagascar, Russian Federation, Mali, Honduras, Korea, Democratic Republic of (North Korea), Croatia, Puerto Rico, Malaysia, Bosnia & Herzegovina, Iran, Tunisia, Niger, Costa Rica, China, Liberia, Liechtenstein, Slovak Republic (Slovakia), Guyana, Vietnam, United States of America (USA), Panama, Kuwait, Seychelles, Bangladesh, Denmark, Japan, Great Britain, Bolivia, Central African Republic, Monaco, Sudan, Belize, Angola, Mauritius, Antigua & Barbuda, Nigeria, Switzerland, Chile, Albania, Georgia, Rwanda, Mauritania, Lesotho, Turkey, Solomon Islands, South Sudan, Comoros, Kyrgyz Republic (Kyrgyzstan), Cuba, Guadeloupe, Nepal, Poland, Colombia, Eritrea, Afghanistan, Congo, Democratic Republic of (DRC), Sweden, Pakistan, Cyprus, Argentina, Myanmar/Burma, Syria, Iceland, Guinea, Barbados, Sao Tome and Principe, Brazil, Romania, Latvia, Finland, Montserrat, Indonesia, Bermuda, Montenegro, Dominican Republic, Samoa, Zimbabwe, Sierra Leone, Singapore, Paraguay, Portugal, Thailand, Sri Lanka, Equatorial Guinea, Uruguay, Chad, Peru

https://kdrobotkit.com/product/raspberry-pi-zero-zero-w-case-pack-red-white/

Transparent Acrylic Case with Cooling fan and Heatsink for Pi B+/2B/3B

INTRODUCTION

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing games.

What’s more, the Raspberry Pi has the ability to interact with the outside world, and has been used in a wide array of digital maker projects, from music machines and parent detectors to weather stations and tweeting birdhouses with infra-red cameras. We want to see the Raspberry Pi being used by kids all over the world to learn to program and understand how computers work.

This Acrylic enclosure for Pi B+/2B/3B provides protection as well as slots to access each header, USB port, HDMI etc. This is a really durable case that will do a great job protecting your Raspberry Pi.

Assemble with FIT0542 heatsink package.

Note: Please use 5V@2.5A power supply, since the cooling fan also need power resource.

SPECIFICATION

Applicable Models: Raspberry Pi Series Model (3B, 2B, B +)

Body material: Acrylic

Product Size: 9.3 * 6.5 * 3 cm

Fan Power Supply: 5V (Paspberry Pi GPIO power supply)

PACKING LIST

Transparent Acrylic Case with Cooling fan for Raspberry Pi B+/2B/3B x1

Raspberry Pi cooling fan x1

Raspberry Heatsink Pack (FIT0542) x1 

Screw & nut x4

COUNTRIES WE SHIP TO

Guinea-Bissau, Russian Federation, Colombia, Swaziland, Trinidad & Tobago, Antigua & Barbuda, Burundi, Cuba, Bermuda, Ivory Coast (Cote d'Ivoire), Georgia, Paraguay, Reunion, Dominican Republic, Kenya, Myanmar/Burma, Maldives, Guatemala, Saint Vincent and the Grenadines, Mayotte, Spain, Bosnia & Herzegovina, Gambia, Algeria, Romania, Jordan, Tunisia, Honduras, Guyana, Montenegro, India, Venezuela, Estonia, Switzerland, Netherlands, Burkina Faso, Costa Rica, Ghana, Lebanon, El Salvador, Cambodia, Iraq, United States of America (USA), Philippines, Serbia, Italy, Djibouti, Afghanistan, Kosovo, Malawi, Uzbekistan, Finland, Poland, Mozambique, Papua New Guinea, Puerto Rico, Korea, Democratic Republic of (North Korea), Eritrea, Laos, Montserrat, Brazil, Singapore, Kyrgyz Republic (Kyrgyzstan), Peru, Ethiopia, Martinique, Luxembourg, Greece, Great Britain, Guinea, Australia, Libya, Namibia, Virgin Islands (US), Pakistan, Mexico, Saint Lucia, Samoa, Andorra, China, Botswana, Sri Lanka, Argentina, South Africa, Portugal, Cayman Islands, Equatorial Guinea, Albania, Germany, Somalia, Sao Tome and Principe, French Guiana, Uganda, Seychelles, Congo, New Zealand, Congo, Democratic Republic of (DRC), Cyprus, China - Hong Kong / Macau, Norway, Cameroon, Suriname, Pacific Islands, Rwanda, Virgin Islands (UK), Mongolia, Czech Republic, Korea, Republic of (South Korea), Slovenia, France, Senegal, Armenia, Tajikistan, Belarus, Nepal, Austria, Benin, Japan, Syria, Morocco, Turks & Caicos Islands, Oman, Madagascar, Mauritius, Zimbabwe, Lesotho, Chad, Hungary, Sudan, Grenada, Lithuania, Bolivia, Dominica, Bulgaria, Saudi Arabia, Latvia, Gabon, Nigeria, Bangladesh, Jamaica, Israel and the Occupied Territories, Togo, Ukraine, Chile, Tanzania, Indonesia, Iceland, Malaysia, Qatar, Sweden, Haiti, Croatia, Saint Kitts and Nevis, Kazakhstan, Angola, Niger, Macedonia, Republic of, Turkmenistan, Belgium, Moldova, Republic of, Sierra Leone, Vietnam, Egypt, Monaco, Fiji, Panama, Bahamas, Turkey, Liberia, Central African Republic, Brunei Darussalam, Timor Leste, Guadeloupe, Iran, Slovak Republic (Slovakia), Comoros, Zambia, Denmark, Mali, Yemen, Kuwait, Liechtenstein, Barbados, Bhutan, Nicaragua, Uruguay, Canada, Azerbaijan, United Arab Emirates, Anguilla, Solomon Islands, Cape Verde, Bahrain, Mauritania, South Sudan, Malta, Ecuador, Belize, Thailand

https://kdrobotkit.com/product/transparent-acrylic-case-with-cooling-fan-and-heatsink-for-pi-b-2b-3b/

Raspberry Pi Heatsink Pack

INTRODUCTION

This is a heatsink pack for Raspberry Pi. It contains 3 different heatsink which respectively correspond 3 different chips. It is a perfect solution for cooling the operating temperature when the Raspberry Pi are dealing with complicated work.

SPECIFICATION

Size:
Black with adhesive heat sink (large): 14 * 14 * 7mm
Black with adhesive heat sink (small): 9 * 9 * 5mm
Separate copper with adhesive heat sink: 12 * 12 * 1mm

Heat sink with adhesive tape

Material: copper and aluminum

Weight: 4g

PACKING LIST

Black with adhesive heat sink (large) x1

Black with adhesive heat sink (small) x1

Separate copper with adhesive heat sink x1

COUNTRIES WE SHIP TO

Swaziland, Korea, Republic of (South Korea), Belgium, Papua New Guinea, Turkey, India, Spain, Switzerland, Chad, China, Poland, Great Britain, Philippines, Barbados, Panama, Venezuela, Brunei Darussalam, Rwanda, Liberia, Trinidad & Tobago, Bolivia, Malta, Kosovo, Anguilla, Tajikistan, United Arab Emirates, Kenya, Peru, Canada, Azerbaijan, Lithuania, Comoros, Russian Federation, Ecuador, Congo, Japan, Hungary, El Salvador, Bulgaria, Netherlands, Turks & Caicos Islands, Thailand, Tanzania, Uruguay, Djibouti, Bermuda, South Sudan, Mali, France, Virgin Islands (UK), Egypt, Cape Verde, Fiji, Montserrat, Cyprus, Guinea-Bissau, Togo, Central African Republic, United States of America (USA), Afghanistan, Mexico, Kyrgyz Republic (Kyrgyzstan), Guadeloupe, Iran, Denmark, Bosnia & Herzegovina, Armenia, Morocco, Uganda, Lebanon, Ethiopia, Maldives, Belize, Suriname, Montenegro, Grenada, Romania, Virgin Islands (US), Uzbekistan, Gabon, Indonesia, Dominican Republic, Lesotho, Cambodia, Timor Leste, Puerto Rico, Ivory Coast (Cote d'Ivoire), Iraq, Nepal, Cayman Islands, Pacific Islands, Brazil, Andorra, Austria, Equatorial Guinea, Senegal, Korea, Democratic Republic of (North Korea), Colombia, Iceland, Moldova, Republic of, Bahrain, Estonia, Mayotte, Yemen, Serbia, Nicaragua, Germany, Paraguay, Singapore, Guyana, Luxembourg, Mozambique, Georgia, Sri Lanka, Monaco, Ghana, Eritrea, New Zealand, Solomon Islands, Pakistan, Malaysia, Honduras, Malawi, Argentina, Angola, Bangladesh, Samoa, Seychelles, Saint Kitts and Nevis, Sudan, Gambia, Martinique, Saint Lucia, Sao Tome and Principe, Bhutan, Guatemala, Israel and the Occupied Territories, Somalia, Saudi Arabia, Algeria, Greece, South Africa, Botswana, Burkina Faso, Haiti, Sierra Leone, Costa Rica, Jordan, Zimbabwe, Niger, Cuba, Slovak Republic (Slovakia), Dominica, Congo, Democratic Republic of (DRC), Chile, Guinea, Australia, Cameroon, Mongolia, Turkmenistan, Mauritania, Laos, Macedonia, Republic of, Madagascar, Qatar, Syria, Jamaica, Oman, Belarus, China - Hong Kong / Macau, Namibia, Vietnam, Slovenia, French Guiana, Liechtenstein, Croatia, Albania, Latvia, Myanmar/Burma, Benin, Kazakhstan, Czech Republic, Burundi, Antigua & Barbuda, Italy, Libya, Mauritius, Bahamas, Saint Vincent and the Grenadines, Finland, Tunisia, Zambia, Portugal, Sweden, Kuwait, Norway, Nigeria, Ukraine, Reunion

https://kdrobotkit.com/product/raspberry-pi-heatsink-pack/

Smart Multifunctional Charger

INTRODUCTION

The LiitoKala Lii-402 is a smart multifunctional charger. if you need charging your batteries and do not want fancy features, this is a good charger, light and powerful. it can charge 4 batteries at a time. Li-on and Ni-MH batteries are supported at the same time.

The charger also has LED indicators, easy to handle. You’ll know all battery information, including battery capacity. You Need a powerful adapter for fast charging but using the Plug from Samsung or apple is good as well.

Functions:

In the case of power, hold the selection key for 2 seconds to select charging current. Press the SELECT button to choose the type of rechargeable battery. it will start to charge 5 seconds after setting the battery type ( for example, 3.20V 3.85V ).

When the USB output is detected, the power indicator turns on for 10 seconds and press button again to check the power.

When the charger connected to 5V power supply, all the LED will turn on, if the battery is not fully put into the charging slot, 500mA (LED) indicator will light on, others light off.

When the batteries connect with charger, the four LED lights light on, 3.7 LED light will flash, then press the button to select the type of battery you need to charge, if not selected, after 5 seconds, the charger will automatically identify batteries and charger them.

When not energized, you can insert the battery to check the power, if needed, press button to check again after 5 seconds.

Ni-MH (1.2V)

Note:
Once charged a type of battery, you need to remove power and reconnect again to charge a different battery type.
Also cannot change charge ampere once charging started or charging new battery set. Need to disconnect USB power and reconnect then set the battery ampere.

SPECIFICATION

• Brand: LiitoKala 


• Type: Charger 


• Plug: USB 


• Charging Cell Type: Lithium Ion,Ni-MH 


• Compatible: 14500,16340 (RCR123),17500,17670,18350,18490,18650 


• Input Voltage: DC 5V 


• Output Voltage: 1.42V 4.2V±0.05V, 3.65±0.05V 4.35±0.05V 


• Input Current: 2A 


• Output Current: 2000mA / 1000mA / 700mA / 500mA


• Product weight: 0.1300 kg 


• Package weight: 0.1600 kg 


• Product size (L x W x H): 11.20 x 9.00 x 3.00 cm / 4.41 x 3.54 x 1.18 inches 


• Package size (L x W x H): 15.00 x 12.00 x 5.00 cm / 5.91 x 4.72 x 1.97 inches

FEATURES

Micro USB DC 5V input, four independent charging, and microcomputer management system.

The LED indicators display the charging progress: 25pct - 50pct - 75pct - 100pct.

Four charging current mode 500mAh / 700mAh / 1000mAh / 2000mAh ), 2000mAh current mode is fixed only on the fourth slot.

Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.85V Li-ion batteries.

Protection for overcharge and over discharge and short circuit. Identify broken battery and polar reverse inspection.

PACKING LIST

LiitoKala Lii - 402 Quick Charger x1

USB Cable(In the package) x1

COUNTRIES WE SHIP TO

Nicaragua, Sierra Leone, Niger, Virgin Islands (US), Guyana, South Africa, Bahrain, Guinea-Bissau, China - Hong Kong / Macau, Afghanistan, Turkmenistan, Estonia, Russian Federation, Armenia, Canada, Thailand, Bhutan, Latvia, Mozambique, Lesotho, Pacific Islands, Kenya, Switzerland, Swaziland, Indonesia, Colombia, Korea, Republic of (South Korea), Algeria, Argentina, Monaco, Madagascar, Myanmar/Burma, Portugal, South Sudan, Puerto Rico, Sri Lanka, Tajikistan, Saudi Arabia, Angola, Guatemala, Anguilla, Botswana, Libya, Albania, Bolivia, Costa Rica, Uganda, Malta, Cuba, Benin, Dominica, United Arab Emirates, Egypt, El Salvador, Bulgaria, Macedonia, Republic of, Cameroon, Ecuador, Turkey, Grenada, Nigeria, Fiji, Kyrgyz Republic (Kyrgyzstan), Croatia, France, Gabon, Cambodia, Nepal, Solomon Islands, Australia, Norway, Kuwait, Bangladesh, Uruguay, Denmark, Cyprus, Reunion, Italy, Greece, Belize, Lebanon, Philippines, Austria, Burundi, Zimbabwe, Samoa, Malawi, Saint Lucia, Panama, Slovak Republic (Slovakia), Singapore, Ukraine, Uzbekistan, Burkina Faso, Martinique, Togo, Ethiopia, Czech Republic, Antigua & Barbuda, Sweden, United States of America (USA), Kosovo, Montserrat, Brunei Darussalam, Namibia, Jamaica, Lithuania, Bermuda, Iraq, Maldives, Liechtenstein, India, Hungary, Andorra, Central African Republic, Saint Kitts and Nevis, Germany, Saint Vincent and the Grenadines, Laos, Cayman Islands, Sao Tome and Principe, Azerbaijan, Chile, Oman, Poland, Belarus, Guinea, Paraguay, New Zealand, Great Britain, Mayotte, Djibouti, Finland, French Guiana, Moldova, Republic of, Congo, Mali, Ivory Coast (Cote d'Ivoire), Tunisia, Iran, Syria, Eritrea, Mexico, Israel and the Occupied Territories, Venezuela, Sudan, Somalia, Chad, Dominican Republic, Equatorial Guinea, Korea, Democratic Republic of (North Korea), Turks & Caicos Islands, Rwanda, Papua New Guinea, Zambia, Pakistan, Mauritius, Serbia, Seychelles, Liberia, Bosnia & Herzegovina, Congo, Democratic Republic of (DRC), Gambia, Mauritania, Malaysia, Timor Leste, Peru, Romania, Bahamas, Iceland, Jordan, Haiti, Japan, Trinidad & Tobago, Barbados, Suriname, Tanzania, Morocco, Netherlands, Qatar, Guadeloupe, Luxembourg, Brazil, Spain, Kazakhstan, Virgin Islands (UK), Honduras, Senegal, Slovenia, Ghana, Yemen, Georgia, Comoros, Belgium, Cape Verde, China, Mongolia, Vietnam, Montenegro

https://kdrobotkit.com/product/smart-multifunctional-charger/

3 x 18650 Battery Holder with DC2.1 Power Jack

INTRODUCTION

The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which refers to a battery with a diameter of 18mm and a length of 65mm.

This 3 x 18650 battery holder has inner connection in series, DC 2.1 power jack, standard 11.1V output. You can connect Arduino directly.

SPECIFICATION

• RoHs Certification


• Battery Model: 18650


• Cell number: 3


• Output Voltage: 11.1 V


• Plug form: DC 2.1 (outer diameter 5.5, inner diameter 2.1)


• Size: 78.24mm x 59.46mm x 21.41mm/ 3.08 x 2.34 x 0.84 inches


• Weight: 30 g

FEATURES

ABS shell

The spring plate is nickel plated with stainless steel.

The material structure is firm and durable.

PACKING LIST

3 x 18650 Battery Holder with DC2.1 Power Jack x1

COUNTRIES WE SHIP TO

Portugal, Congo, Democratic Republic of (DRC), Dominican Republic, Rwanda, Greece, Chile, Latvia, Saint Kitts and Nevis, Ecuador, Morocco, Chad, Belize, Sri Lanka, Hungary, Bhutan, Mali, Andorra, Eritrea, Central African Republic, Liberia, Austria, Congo, Sweden, Senegal, Germany, Liechtenstein, Afghanistan, Guatemala, Zimbabwe, Iran, Panama, Bahrain, Burkina Faso, Iraq, Georgia, Lebanon, France, Ethiopia, Japan, Great Britain, Armenia, Guinea-Bissau, Thailand, Korea, Republic of (South Korea), Montserrat, Saudi Arabia, Mozambique, Mongolia, Seychelles, Costa Rica, Tanzania, Bolivia, Ukraine, Anguilla, Swaziland, Libya, Italy, Iceland, Uganda, Angola, Luxembourg, China, Gabon, Peru, Indonesia, Paraguay, Kosovo, Australia, Virgin Islands (UK), Guyana, Israel and the Occupied Territories, Belgium, Gambia, Trinidad & Tobago, Egypt, Namibia, Malta, Reunion, Pacific Islands, Bulgaria, Maldives, Barbados, Laos, Benin, Haiti, Botswana, Romania, United Arab Emirates, El Salvador, Suriname, Cameroon, Lithuania, Canada, Nicaragua, Algeria, Nepal, Cuba, Saint Lucia, Guinea, Brazil, French Guiana, Turkey, Denmark, Czech Republic, Jamaica, Norway, Cape Verde, Somalia, Colombia, Serbia, Slovak Republic (Slovakia), Mayotte, Madagascar, Ghana, Syria, Virgin Islands (US), Mauritania, United States of America (USA), Singapore, Martinique, Jordan, Bangladesh, Albania, Kazakhstan, Vietnam, Bermuda, India, Malawi, Cyprus, Poland, Dominica, Oman, Saint Vincent and the Grenadines, Djibouti, Belarus, Ivory Coast (Cote d'Ivoire), South Africa, Estonia, Kenya, Tunisia, Yemen, Nigeria, New Zealand, Fiji, South Sudan, Turkmenistan, Niger, Grenada, Sierra Leone, Bosnia & Herzegovina, Malaysia, Sudan, Zambia, Croatia, Moldova, Republic of, Cayman Islands, Equatorial Guinea, Cambodia, Myanmar/Burma, Bahamas, Sao Tome and Principe, Netherlands, Timor Leste, Turks & Caicos Islands, Brunei Darussalam, Switzerland, Kyrgyz Republic (Kyrgyzstan), Montenegro, Uruguay, Slovenia, Korea, Democratic Republic of (North Korea), Guadeloupe, Spain, Burundi, Samoa, Lesotho, Antigua & Barbuda, Uzbekistan, China - Hong Kong / Macau, Honduras, Pakistan, Solomon Islands, Comoros, Togo, Papua New Guinea, Russian Federation, Mexico, Venezuela, Puerto Rico, Mauritius, Monaco, Argentina, Azerbaijan, Philippines, Macedonia, Republic of, Qatar, Kuwait, Tajikistan, Finland

https://kdrobotkit.com/product/3-x-18650-battery-holder-with-dc2-1-power-jack/

2 x 18650 Battery Holder with DC2.1 Power Jack

INTRODUCTION

The 18650 lithium battery is a commonly used lithium battery in electronic products. It is often used in batteries of laptop computers and power banks. 18650, which refers to a battery with a diameter of 18mm and a length of 65mm.

This 2 x 18650 battery holder has inner connection in series, DC 2.1 power jack, standard 7.4V output. You can connect Arduino directly.

SPECIFICATION

• RoHs Certification


• Battery Model: 18650


• Cell number: 2


• Output Voltage: 7.4 V


• Plug form: DC 2.1 (outer diameter 5.5, inner diameter 2.1)


• Size: 77.9 x 40.11 x 21.41 mm/ 3.07 x 1.58 x 0.84 inches


• Weight: 15.5 g

FEATURES

ABS shell

The spring plate is nickel plated with stainless steel.

The material structure is firm and durable.

PACKING LIST

2 x 18650 Battery Holder with DC2.1 Power Jack x1

COUNTRIES WE SHIP TO

Hungary, Panama, Afghanistan, Mexico, Brunei Darussalam, Tanzania, Russian Federation, Paraguay, Germany, Puerto Rico, Saint Vincent and the Grenadines, Algeria, Virgin Islands (US), Rwanda, Kazakhstan, Mozambique, Swaziland, Mali, Honduras, Greece, Barbados, Korea, Democratic Republic of (North Korea), Guinea-Bissau, Latvia, Thailand, Lithuania, Kuwait, Chile, Bermuda, Burkina Faso, Montserrat, Philippines, Uganda, Zambia, Vietnam, Reunion, Belarus, Liberia, Cayman Islands, Guyana, South Sudan, Austria, Somalia, Malawi, Maldives, Sri Lanka, Georgia, Guatemala, Bhutan, Saudi Arabia, Costa Rica, Qatar, Senegal, Bahamas, Yemen, Moldova, Republic of, Brazil, Dominican Republic, Bosnia & Herzegovina, Bulgaria, Romania, United Arab Emirates, Ethiopia, Solomon Islands, Libya, Switzerland, Papua New Guinea, Lebanon, Ivory Coast (Cote d'Ivoire), Bahrain, Zimbabwe, Portugal, Jamaica, Seychelles, Argentina, Kyrgyz Republic (Kyrgyzstan), Central African Republic, Haiti, Venezuela, Great Britain, Lesotho, Eritrea, South Africa, Gabon, Andorra, Grenada, Luxembourg, Saint Lucia, Serbia, Guadeloupe, Korea, Republic of (South Korea), Nigeria, Cuba, Cambodia, Belgium, Spain, Antigua & Barbuda, Czech Republic, Dominica, Montenegro, Indonesia, Norway, Angola, Cyprus, Turkey, United States of America (USA), Malaysia, French Guiana, Croatia, Fiji, Iran, Samoa, Monaco, Sweden, Albania, Peru, Canada, Tajikistan, Slovak Republic (Slovakia), Mauritania, Liechtenstein, Turkmenistan, Ukraine, Mongolia, France, Azerbaijan, Denmark, Australia, Anguilla, Cape Verde, Guinea, Morocco, Turks & Caicos Islands, Botswana, Congo, Democratic Republic of (DRC), Timor Leste, Colombia, Gambia, Finland, Oman, Macedonia, Republic of, Nicaragua, Pakistan, Togo, Armenia, Ecuador, Mauritius, Cameroon, Djibouti, El Salvador, Jordan, Suriname, Congo, Belize, Madagascar, Iraq, Iceland, Benin, Pacific Islands, Namibia, Kosovo, Virgin Islands (UK), Sierra Leone, Uzbekistan, Equatorial Guinea, Israel and the Occupied Territories, Egypt, Comoros, Chad, Poland, Ghana, Italy, Sudan, China, Japan, India, Burundi, Sao Tome and Principe, China - Hong Kong / Macau, Malta, Estonia, Tunisia, Laos, Myanmar/Burma, Bangladesh, New Zealand, Saint Kitts and Nevis, Uruguay, Mayotte, Niger, Nepal, Trinidad & Tobago, Bolivia, Syria, Martinique, Netherlands, Slovenia, Singapore, Kenya

https://kdrobotkit.com/product/2-x-18650-battery-holder-with-dc2-1-power-jack/

micro:bit Enclosure (LEGO Compatible)

INTRODUCTION

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by KDRobotKit, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection.

The enclosure has LEGO interface on the back. With LEGO interface, you can build lots of creative projects. It is a perfect combination between micro:bit and LEGO!

SPECIFICATION

Size: 57.5x34.5x14.4 mm/ 2.26x1.36x0.57 inches

Weight: 20g

FEATURES

Reserved A-B buttons and RST Button

ABS transparent material

LEGO compatible

PACKING LIST

micro:bit LEGO Enclosure x1

DOCUMENTS

Dimension

COUNTRIES WE SHIP TO

Vietnam, Hungary, El Salvador, Guinea-Bissau, Senegal, Lebanon, Virgin Islands (UK), Sri Lanka, Brazil, Denmark, Albania, China, Azerbaijan, Slovak Republic (Slovakia), Maldives, Bangladesh, Montserrat, Iraq, Monaco, Kazakhstan, Serbia, Moldova, Republic of, Mauritania, Peru, Cambodia, Tanzania, Venezuela, Germany, Greece, Comoros, Bhutan, Panama, United States of America (USA), Korea, Republic of (South Korea), Puerto Rico, Samoa, Turkmenistan, Reunion, South Africa, Anguilla, Cuba, Liechtenstein, Myanmar/Burma, Kenya, Belgium, Chile, Turkey, Nicaragua, Burundi, Swaziland, Madagascar, South Sudan, Tajikistan, Macedonia, Republic of, Croatia, Burkina Faso, New Zealand, Bosnia & Herzegovina, Suriname, Sudan, Ecuador, Niger, China - Hong Kong / Macau, Syria, Central African Republic, Costa Rica, Philippines, Guatemala, Martinique, Papua New Guinea, Mexico, Sierra Leone, Iran, Bermuda, Ethiopia, Guyana, Netherlands, Congo, Fiji, Angola, Mongolia, Malta, Sao Tome and Principe, Malawi, Italy, Rwanda, Congo, Democratic Republic of (DRC), Sweden, Spain, Trinidad & Tobago, Belize, Cyprus, Liberia, Nigeria, Pacific Islands, Mali, Uganda, Antigua & Barbuda, Ivory Coast (Cote d'Ivoire), Czech Republic, Austria, Saint Vincent and the Grenadines, Russian Federation, Brunei Darussalam, Togo, Paraguay, Argentina, Botswana, Romania, Djibouti, Ghana, Great Britain, Mayotte, Saudi Arabia, Estonia, Georgia, Uruguay, Pakistan, Iceland, Barbados, Zimbabwe, Dominica, Algeria, Malaysia, Tunisia, Bahamas, Qatar, Switzerland, Montenegro, Libya, Kyrgyz Republic (Kyrgyzstan), Lithuania, Bahrain, Somalia, Israel and the Occupied Territories, Virgin Islands (US), Poland, Solomon Islands, Thailand, Andorra, Zambia, Haiti, Equatorial Guinea, Yemen, Canada, Dominican Republic, Benin, Oman, Portugal, Kosovo, Uzbekistan, Mozambique, Armenia, Namibia, Honduras, Laos, Guadeloupe, Japan, Jamaica, Singapore, Afghanistan, Belarus, Grenada, Turks & Caicos Islands, Bulgaria, Nepal, Finland, Timor Leste, Morocco, Latvia, Bolivia, United Arab Emirates, Ukraine, Cape Verde, Korea, Democratic Republic of (North Korea), Kuwait, Mauritius, Colombia, Saint Kitts and Nevis, Slovenia, India, Egypt, French Guiana, France, Chad, Luxembourg, Seychelles, Cameroon, Norway, Eritrea, Gabon, Saint Lucia, Indonesia, Gambia, Australia, Guinea, Lesotho, Jordan, Cayman Islands

https://kdrobotkit.com/product/microbit-enclosure-lego-compatible/

Gravity: I2C BME680 Environmental Sensor

INTRODUCTION

KDRobotKit BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer.

With KDRobotKit Gravity BME680 Environmental Sensor, you can monitor 4 environmental parameters simultaneously at the most. It is designed for air quality monitor, and due to the MEMS technology, BME680 has a small size and low power consumption. It can be widely used in environmental monitoring, home automation and control, Internet of Things (IoT) wearable device, GPS enhancement, etc.

KDRobotKit Gravity BME680 environmental sensor provides a Gravity I2C connector, plug & play, easy to connect. With onboard voltage regulator IC and level translator IC, KDRobotKit Gravity BME680 environmental sensor shows good compatibility. It can be directly connected to 3.3V and 5V systems. Moreover, there is also a SPI connector in reserve for further expansion projects.

With the development of industrialization, air pollution is getting worse and worse. Toxic chemical odors are even common with new furniture. These invisible killers are destroying your health day by day. You do need to concern about your health as soon as possible and KDRobotKit Gravity BME680 environmental sensor can help make an air quality monitor. KDRobotKit Gravity BME680, take good care of your health!

Note: The IAQ(In-Door-Quality) calculation function is only supported on FireBeetle ESP8266 Microcontroller.

SPECIFICATION

Input Voltage: 3.3V~5.0V

Operating Current: 5mA (25mA in VOC)

Wiring Connector: Gravity I2C

Connector in Reserve: SPI

Temperature Measurement Range: -40℃~+85℃

Temperature Measurement Precision: ±1.0℃(0~65℃)

Humidity Measurement Range: 0-100%r.H.

Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)

Atmospheric Pressure Measurement Range: 300-1100hPa

Atmospheric Pressure Measurement Precision: ±0.6hPa(300-1100hPa,0~65℃)

IAQ (Indoor Air Quality) Range: 0~500 (the larger the worse)

Module Size: 30 × 22(mm) / 1.18 x0.87(inches)

FEATURES

MEMS sensor, small size, low power consumption, high reliability

Wide voltage input, compatible with 3.3V and 5V controller

Highly integrated environmental sensor: temperature, humidity, barometer and VOC, four-in-one environmental parameter monitoring

Gravity I2C connector, plug and play, while reserving XH2.54 SPI connector for expansion

Small size and easy to install

PACKING LIST

Gravity: I2C BME680 Environmental Sensor x1

XH2.54-6pin Header x1

Gravity-4P I2C/ UART Sensor Wire x1

DOCUMENTS

Product wiki
More Documents

COUNTRIES WE SHIP TO

Malaysia, Guyana, Montenegro, South Sudan, Kuwait, Qatar, Iraq, Virgin Islands (UK), Macedonia, Republic of, Ecuador, Montserrat, Suriname, Algeria, Brazil, Poland, Netherlands, French Guiana, Slovenia, Burkina Faso, Serbia, Iran, Bahrain, Armenia, Singapore, Czech Republic, Saudi Arabia, Pakistan, Jamaica, Kazakhstan, Malta, China, Laos, Nicaragua, Monaco, Nepal, Kenya, Latvia, Samoa, Central African Republic, Gambia, Mexico, Cameroon, Sao Tome and Principe, Brunei Darussalam, Chad, Myanmar/Burma, Vietnam, Russian Federation, Congo, Democratic Republic of (DRC), Maldives, Finland, Mauritius, Swaziland, Guatemala, El Salvador, United States of America (USA), Equatorial Guinea, Spain, Yemen, Ethiopia, Tajikistan, Solomon Islands, Uzbekistan, Germany, Bangladesh, Indonesia, Colombia, Nigeria, Belize, Comoros, India, Dominican Republic, Andorra, Saint Vincent and the Grenadines, Congo, United Arab Emirates, Rwanda, Papua New Guinea, Georgia, Niger, Turks & Caicos Islands, Timor Leste, Ukraine, Luxembourg, Honduras, Bermuda, Botswana, Kosovo, Lithuania, Austria, Denmark, Costa Rica, Gabon, Anguilla, Barbados, Lesotho, Afghanistan, Burundi, Djibouti, Croatia, Japan, Madagascar, Mauritania, Saint Lucia, Reunion, Mongolia, Jordan, Namibia, Romania, Guinea-Bissau, Bosnia & Herzegovina, Zimbabwe, Sudan, South Africa, Dominica, Trinidad & Tobago, China - Hong Kong / Macau, Azerbaijan, Argentina, Guadeloupe, Zambia, Estonia, Cuba, Lebanon, Sri Lanka, Tunisia, Kyrgyz Republic (Kyrgyzstan), Korea, Republic of (South Korea), Venezuela, Great Britain, Uganda, Canada, Peru, Slovak Republic (Slovakia), Seychelles, Cayman Islands, Panama, Mayotte, Liechtenstein, Cape Verde, Norway, Turkey, Cambodia, Uruguay, Antigua & Barbuda, Portugal, Tanzania, Ivory Coast (Cote d'Ivoire), Haiti, Korea, Democratic Republic of (North Korea), Senegal, Philippines, Virgin Islands (US), Switzerland, Libya, Puerto Rico, France, Chile, Albania, Australia, Ghana, Belgium, Guinea, Hungary, Italy, Mozambique, Belarus, Eritrea, Bulgaria, Liberia, Thailand, Sweden, Iceland, Mali, Sierra Leone, Somalia, Saint Kitts and Nevis, Pacific Islands, Bhutan, Syria, Egypt, Greece, Paraguay, Angola, Israel and the Occupied Territories, Grenada, Cyprus, Martinique, Togo, Fiji, New Zealand, Benin, Turkmenistan, Bahamas, Bolivia, Moldova, Republic of, Morocco, Malawi, Oman

https://kdrobotkit.com/product/gravity-i2c-bme680-environmental-sensor/